The Screw,machine, cataloged under National Stock Number 5305-00-151-2260, is classified within Federal Supply Class 5305 (No Item Name Available) of the Hardware and Abrasives group. The primary manufacturer of record is Aeronautical Standards Group Dept of Navy and Air Force. Government technical data includes 17 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 2 commercial cross-references from 2 manufacturers, enabling identification through both NSN and commercial part number lookups. 12 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-151-2260 |
| Primary Part Number | AN510-1-2 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — No Item Name Available |
| Manufacturer | Aeronautical Standards Group Dept of Navy and Air Force |
| Status | ACTIVE |
| Countersink Angle | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
| Fastener Length | 0.094 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN |
| Thread Quantity Per Inch | 72 |
| Thread Length | 0.125 INCHES MAXIMUM IN |
| Screw Surface Treatment Document and Classification | QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE |
| Thread Series Designator | UNF |
| Minimum Tensile Strength | 55000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 2A A |
| Thread Direction | RIGHT-HAND |
| Head Diameter | 0.126 INCHES MINIMUM AND 0.146 INCHES MAXIMUM IN |
| Head Height | 0.023 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN |
| Screw Surface Treatment | CADMIUM |
| Internal Drive Style | CROSS RECESS TYPE II |
| Screw Material | STEEL OR STEEL COMP 1010 |
| Nominal Thread Diameter | 0.073 INCHES IN |
| Head Style | FLAT COUNTERSUNK UNDERCUT |
| Screw Material Document and Classification | QQ-S-630 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-631 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-634 FED SPEC 2ND MATERIAL RESPONSE |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| AN510-1-2 | Aeronautical Standards Group Dept of Navy and Air Force (USA) |
| FFS92ANDTYPE1ANDSTYLE2 | Federal Specifications Promulgated by General Services Administration Washington DC (USA) |
NSN 5305-00-151-2260 is a Screw,machine, manufactured by Aeronautical Standards Group Dept of Navy and Air Force, classified under FSC 5305 (No Item Name Available). Status: active.
NSN 5305-00-151-2260 has 2 cross-referenced part numbers: AN510-1-2 (Aeronautical Standards Group Dept of Navy and Air Force), FFS92ANDTYPE1ANDSTYLE2 (Federal Specifications Promulgated by General Services Administration Washington DC).
There are 12 known substitutes for 5305-00-151-2260: 5305-00-144-4027, 5305-00-144-4028, 5305-00-151-1611 and 9 more. Verify interchangeability with system specifications before substitution.
Key specifications for AN510-1-2: Countersink Angle: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM; Fastener Length: 0.094 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN; Thread Quantity Per Inch: 72; Thread Length: 0.125 INCHES MAXIMUM IN. 17 total characteristics are documented in the Federal Logistics Information System.