The ViewMaster deskbase, made from die-cast aluminium, with its dedicated design and cable management possibilities, is the perfect solution for mounting ViewMaster products onto the desk. Provided with a M10 (through desk) bolt and a desk clamp it can be mounted on virtually any desk. It can also be mounted on top of most cable management cut-outs.<br><br>- Deskbase<br>- Die-cast aluminium<br>- Comes with both bolt through desk and Desk clamp<br>- Desk clamp capacity 55mm<br>- Bolt through desk min./max.
ø 10-70mm<br> This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-151-8095, indicating validated use in U.S. government and defense logistics supply chains.
| drive_size | 2.50 |
| design_type | HARD DISK |
| unit_design | PORTABLE |
| overall_width | 80.0 MILLIMETERS NOMINAL MM |
| drive_quantity | 1 |
| interface_type | USB |
| overall_height | 15.0 MILLIMETERS NOMINAL MM |
| overall_length | 121.0 MILLIMETERS NOMINAL MM |
| special_features | INPUT POWER 5V FROM GOLDEN XRS3, WIRELESS BLUETOOTH IEEE 802.15.4, 2.4GHZ, OR ISM 802.11B/G/N, 2.4GHZ, CONNECTORS 1-5 PIN LEMO B SERIES SIZE 0 PLUG, 1 5 PIN LEMO B SERIES SIZE 0 RECEPTACLE GHz |
| data_storage_capacity | 1.0 TERABYTES |
| unpackaged_unit_width | 3.5 INCHES NOMINAL IN |
| unpackaged_unit_height | 2.3 INCHES NOMINAL IN |
| NSN | 3110-00-151-8095 |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | GREASE |
| FLANGE OUTSIDE DIAMETER | 0.6870 INCHES NOMINAL IN |
| OUTER RING WIDTH | 0.2260 INCHES NOMINAL IN |
| FLANGE WIDTH | 0.0420 INCHES NOMINAL IN |
| SURFACE FINISH | GROUND |
| INNER RING WIDTH | 0.2490 INCHES MINIMUM AND 0.2510 INCHES MAXIMUM IN |
| INTERNAL CLEARANCE | 0.0002 INCHES MINIMUM RADIAL AND 0.0006 INCHES MAXIMUM RADIAL IN |
| SPECIAL FEATURES | BORE CORNER CHAMFERED0.0100 IN. BY 45 DEG AND SHIELDS ARE REMOVABLE IN |
| BORE DIAMETER | 0.2500 INCHES MINIMUM AND 0.2503 INCHES MAXIMUM IN |