PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 760-1802 STYLE 333
760-1802 STYLE 333 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SNAP HOOK is a the manufacturer industrial component. Key specifications include material: IRON MALLEABLE CONNECTION END, design_type: SWIVEL, inside_width: 0.875 INCHES NOMINAL IN, overall_length: 4.750 INCHES NOMINAL IN, unattached_ring: NOT INCLUDED, end_connection_style: SWIVEL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-205-5596, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
760-1802 STYLE 333
NSN: 5340-00-205-5596
FSC: 5340
CAGE: 8W529 — W. H. SMITH HARDWARE COMPANY, THE (USA)
SPECIFICATIONS
materialIRON MALLEABLE CONNECTION END
design_typeSWIVEL
inside_width0.875 INCHES NOMINAL IN
overall_length4.750 INCHES NOMINAL IN
unattached_ringNOT INCLUDED
end_connection_styleSWIVEL
hook_style_designatorPIVOT
rubber_covered_featureNOT INCLUDED
NSN5340-00-205-5596
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 760-1802 STYLE 333 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: IRON MALLEABLE HOOK
•
RUBBER COVERED FEATURE: NOT INCLUDED
•
UNATTACHED RING: NOT INCLUDED
•
HOOK STYLE DESIGNATOR: PIVOT
•
END CONNECTION STYLE: SWIVEL
•
DESIGN TYPE: SWIVEL
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL LENGTH4.750 INCHES NOMINAL IN
MATERIALIRON MALLEABLE HOOK
MATERIALIRON MALLEABLE CONNECTION END
RUBBER COVERED FEATURENOT INCLUDED
UNATTACHED RINGNOT INCLUDED
HOOK STYLE DESIGNATORPIVOT
END CONNECTION STYLESWIVEL
DESIGN TYPESWIVEL
INSIDE WIDTH0.875 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
2514Upgraded Successor
successor cross-reference
successor
1-D-2529 ITEM 3.3Upgraded Successor
successor cross-reference
successor
10187985-001Interchangeable
interchangeable cross-reference
interchangeable
F4DDFS160Interchangeable
interchangeable cross-reference
interchangeable
SP719-6Interchangeable
interchangeable cross-reference
interchangeable
333-7/8Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 760-1802 STYLE 333?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 760-1802 STYLE 333?
760-1802 STYLE 333 is a SNAP HOOK.
What parts can replace 760-1802 STYLE 333?
There are 6 known substitutes for 760-1802 STYLE 333: 2514, 1-D-2529 ITEM 3.3, 10187985-001 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 760-1802 STYLE 333?
760-1802 STYLE 333 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-205-5596. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 760-1802 STYLE 333

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026