5193422 — PIN,GROOVED,HEADED

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

5193422: PIN,GROOVED,HEADED.

The PIN,GROOVED,HEADED is a the manufacturer industrial component. Key specifications include height: 0.094 INCHES NOMINAL IN, diameter: 0.371 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN, material: STEEL OVERALL, head_style: DEE, undercut_width: 0.051 INCHES MINIMUM AND 0.057 INCHES MAXIMUM IN, first_end_style: CHAMFERED. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-282-1151, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

5193422

NSN: 5315-00-282-1151
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 62860 — PENN POWER GROUP LLC DIV GOVERNMENT SERVICES DEPARTMENT (USA)

SPECIFICATIONS

height	0.094 INCHES NOMINAL IN
diameter	0.371 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
material	STEEL OVERALL
head_style	DEE
undercut_width	0.051 INCHES MINIMUM AND 0.057 INCHES MAXIMUM IN
first_end_style	CHAMFERED
effective_length	0.962 INCHES NOMINAL IN
style_designator	GROOVE
pin_head_diameter	0.500 INCHES NOMINAL IN
under_head_length	1.156 INCHES NOMINAL IN
undercut_diameter	0.297 INCHES MINIMUM AND 0.311 INCHES MAXIMUM IN
first_end_taper_angle	45.0 DEGREES NOMINAL
NSN	5315-00-282-1151

COMPONENT DIAGRAM

KEY FEATURES

•

UNDERCUT WIDTH: 0.051 INCHES MINIMUM AND 0.057 INCHES MAXIMUM IN

•

FIRST END TAPER LENGTH: 0.031 INCHES NOMINAL IN

•

UNDERCUT DIAMETER: 0.297 INCHES MINIMUM AND 0.311 INCHES MAXIMUM IN

•

DISTANCE FROM CENTERLINE TO FLAT: 0.188 INCHES NOMINAL IN

•

UNDER HEAD LENGTH: 1.156 INCHES NOMINAL IN

•

FIRST END STYLE: CHAMFERED

•

STYLE DESIGNATOR: GROOVE

•

PIN HEAD DIAMETER: 0.500 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

UNDERCUT WIDTH	0.051 INCHES MINIMUM AND 0.057 INCHES MAXIMUM IN
FIRST END TAPER LENGTH	0.031 INCHES NOMINAL IN
UNDERCUT DIAMETER	0.297 INCHES MINIMUM AND 0.311 INCHES MAXIMUM IN
DISTANCE FROM CENTERLINE TO FLAT	0.188 INCHES NOMINAL IN
UNDER HEAD LENGTH	1.156 INCHES NOMINAL IN
FIRST END STYLE	CHAMFERED
STYLE DESIGNATOR	GROOVE
PIN HEAD DIAMETER	0.500 INCHES NOMINAL IN
DIAMETER	0.371 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
FIRST END TAPER ANGLE	45.0 DEGREES NOMINAL

SUBSTITUTES & CROSS-REFERENCES 4

2-04801Reference document

Same NSN cross-reference

Reference document — Secondary reference

K3284Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

266694R1Reference document

Same NSN cross-reference

Reference document — Secondary reference

CL8484Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 5193422?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 5193422?

5193422 is a PIN,GROOVED,HEADED.

What parts can replace 5193422?

There are 4 known substitutes for 5193422: 2-04801, K3284, 266694R1 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 5193422?

5193422 is cataloged in the U.S. Government catalog under NSN 5315-00-282-1151. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

5193422 — PIN,GROOVED,HEADED

Request a Quote — 5193422