2-04801 — 2-04801

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

2-04801: 2-04801.

The 2-04801 is a the manufacturer industrial component. Key specifications include special_features: ELEC STAT DISCH SENS, features_provided: ELECTROSTATIC SENSITIVE, end_item_identification: SATELLITE READOUT STUP, criticality_code_justification: CBBL, part_name_assigned_by_controlling_agency: DRIVER/ATT INTERFACE. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-282-1151, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 2-04801

NSN: 5315-00-282-1151
NIINs: 002821151, 010045159, 010407597, 013630372
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 77873 — ROCKFORD POWERTRAIN INC DIV POWERTRAIN ROCKFORD, INC. (USA)

SPECIFICATIONS

special_features	ELEC STAT DISCH SENS
features_provided	ELECTROSTATIC SENSITIVE
end_item_identification	SATELLITE READOUT STUP
criticality_code_justification	CBBL
part_name_assigned_by_controlling_agency	DRIVER/ATT INTERFACE
NSN	5315-00-282-1151

COMPONENT DIAGRAM

KEY FEATURES

•

UNDERCUT WIDTH: 0.051 INCHES MINIMUM AND 0.057 INCHES MAXIMUM IN

•

FIRST END TAPER LENGTH: 0.031 INCHES NOMINAL IN

•

UNDERCUT DIAMETER: 0.297 INCHES MINIMUM AND 0.311 INCHES MAXIMUM IN

•

DISTANCE FROM CENTERLINE TO FLAT: 0.188 INCHES NOMINAL IN

•

UNDER HEAD LENGTH: 1.156 INCHES NOMINAL IN

•

FIRST END STYLE: CHAMFERED

•

STYLE DESIGNATOR: GROOVE

•

PIN HEAD DIAMETER: 0.500 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

UNDERCUT WIDTH	0.051 INCHES MINIMUM AND 0.057 INCHES MAXIMUM IN
FIRST END TAPER LENGTH	0.031 INCHES NOMINAL IN
UNDERCUT DIAMETER	0.297 INCHES MINIMUM AND 0.311 INCHES MAXIMUM IN
DISTANCE FROM CENTERLINE TO FLAT	0.188 INCHES NOMINAL IN
UNDER HEAD LENGTH	1.156 INCHES NOMINAL IN
FIRST END STYLE	CHAMFERED
STYLE DESIGNATOR	GROOVE
PIN HEAD DIAMETER	0.500 INCHES NOMINAL IN
DIAMETER	0.371 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
FIRST END TAPER ANGLE	45.0 DEGREES NOMINAL

SUBSTITUTES & CROSS-REFERENCES 4

K3284Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

266694R1Reference document

Same NSN cross-reference

Reference document — Secondary reference

5193422Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

CL8484Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 2-04801?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 2-04801?

2-04801 is a 2-04801. It is classified as a MRO (MRO_GENERAL).

What parts can replace 2-04801?

There are 4 known substitutes for 2-04801: K3284, 266694R1, 5193422 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 2-04801?

2-04801 is cataloged in the U.S. Government catalog under NSN 5315-00-282-1151. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

2-04801 — 2-04801

Request a Quote — 2-04801