PartsTable
Technical Data Sheet
PartsTable / O-RING / 516-5343916-F23
516-5343916-F23 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, temp_rating: -20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, hardness_rating: 90.0 SHORE DUROMETER A NOMINAL, outside_diameter: 1.156 INCHES NOMINAL IN, center_hole_diameter: 0.915 INCHES MINIMUM AND 0.933 INCHES MAXIMUM IN, cross-sectional_height: 0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-096-8825, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
516-5343916-F23
NSN: 5331-01-096-8825
FSC: 5331 — O-RING
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
temp_rating-20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
hardness_rating90.0 SHORE DUROMETER A NOMINAL
outside_diameter1.156 INCHES NOMINAL IN
center_hole_diameter0.915 INCHES MINIMUM AND 0.933 INCHES MAXIMUM IN
cross-sectional_height0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
departure_from_cited_documentCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
criticality_code_justificationZZZW
NSN5331-01-096-8825
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 516-5343916-F23 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.915 INCHES MINIMUM AND 0.933 INCHES MAXIMUM IN
•
CRITICALITY CODE JUSTIFICATION: ZZZW
•
DEPARTURE FROM CITED DOCUMENT: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
•
HARDNESS RATING: 90.0 SHORE DUROMETER A NOMINAL
•
OUTSIDE DIAMETER: 1.156 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
•
TEMP RATING: -20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER0.915 INCHES MINIMUM AND 0.933 INCHES MAXIMUM IN
CRITICALITY CODE JUSTIFICATIONZZZW
DEPARTURE FROM CITED DOCUMENTCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
HARDNESS RATING90.0 SHORE DUROMETER A NOMINAL
OUTSIDE DIAMETER1.156 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
TEMP RATING-20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
MATERIALRUBBER FLUOROCARBON CLASS FPM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
D2500FF-B16.24 ITEM 19Interchangeable
interchangeable cross-reference
interchangeable
AS3581-912Interchangeable
interchangeable cross-reference
interchangeable
5331PL2221414Interchangeable
interchangeable cross-reference
interchangeable
847622PC46Interchangeable
interchangeable cross-reference
interchangeable
M83248/2-912Interchangeable
interchangeable cross-reference
interchangeable
5330PL0828363Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 516-5343916-F23?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 516-5343916-F23?
516-5343916-F23 is a O-RING.
What parts can replace 516-5343916-F23?
There are 15 known substitutes for 516-5343916-F23: D2500FF-B16.24 ITEM 19, AS3581-912, 5331PL2221414 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 516-5343916-F23?
516-5343916-F23 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-096-8825. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 516-5343916-F23

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026