PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5150890
5150890 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: ASBESTOS AND RUBBER SYNTHETIC OVERALL, hole_diameter: 0.281 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.562 INCHES NOMINAL IN, aperture_width: 1.000 INCHES NOMINAL IN, overall_length: 2.438 INCHES NOMINAL IN, aperture_length: 1.312 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-367-7304, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5150890
NSN: 5330-00-367-7304
FSC: 5330
CAGE: 92392 — ALLIS-CHALMERS CORP (USA)
SPECIFICATIONS
materialASBESTOS AND RUBBER SYNTHETIC OVERALL
hole_diameter0.281 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width1.562 INCHES NOMINAL IN
aperture_width1.000 INCHES NOMINAL IN
overall_length2.438 INCHES NOMINAL IN
aperture_length1.312 INCHES NOMINAL IN
special_featuresTWO BOLT HOLES 0.219 IN. DIA IN
bolt_hole_quantity4
inside_corner_radius0.125 INCHES NOMINAL IN
outside_corner_radius0.281 INCHES NOMINAL IN
cross-sectional_thickness0.031 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-367-7304
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5150890 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE CORNER RADIUS: 0.125 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 0.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
OUTSIDE CORNER RADIUS: 0.281 INCHES NOMINAL IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 0.281 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 4
TECHNICAL CHARACTERISTICS (FLIS)
INSIDE CORNER RADIUS0.125 INCHES NOMINAL IN
OVERALL LENGTH2.438 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH0.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE CORNER RADIUS0.281 INCHES NOMINAL IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.281 INCHES NOMINAL IN
OVERALL WIDTH1.562 INCHES NOMINAL IN
BOLT HOLE QUANTITY4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.875 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
MATERIALASBESTOS AND RUBBER SYNTHETIC OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
10195440Interchangeable
interchangeable cross-reference
interchangeable
AN345-10Interchangeable
interchangeable cross-reference
interchangeable
901834K1Interchangeable
interchangeable cross-reference
interchangeable
C12204Interchangeable
interchangeable cross-reference
interchangeable
53140Interchangeable
interchangeable cross-reference
interchangeable
42-10174Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5150890?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5150890?
5150890 is a GASKET.
What parts can replace 5150890?
There are 18 known substitutes for 5150890: 10195440, AN345-10, 901834K1 and 15 more. Substitute compatibility should be verified for your specific system.
Is 5150890 still available?
5150890 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5150890

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026