PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5071-002

5071-002 — Technical Data Sheet

✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include end_item_identification: FOR USE ON THE DIRECT DIGITIZER 150 PROCESSOR, NSN 6525-01-492-3671, part_name_assigned_by_controlling_agency: CR CHEST PHANTOM END ITEM NSN 6525-01-492-3671. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 3110-00-882-3635, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5071-002
NSN: 3110-00-882-3635
FSC: 3110
CAGE: 82577 — RAYTHEON COMPANY DBA RAYTHEON (USA)
SPECIFICATIONS
end_item_identificationFOR USE ON THE DIRECT DIGITIZER 150 PROCESSOR, NSN 6525-01-492-3671
part_name_assigned_by_controlling_agencyCR CHEST PHANTOM END ITEM NSN 6525-01-492-3671
NSN3110-00-882-3635
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 5071-002 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 1.1250 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
SURFACE FINISH: GROUND
•
LOAD DIRECTION: RADIAL
•
LUBRICATION MATERIAL: GREASE
•
SHIELD QUANTITY: 2
•
RETAINER FABRICATION METHOD: PRESSED
•
INTERNAL FIT-UP DESIGNATION: STANDARD
TECHNICAL CHARACTERISTICS
OVERALL OUTSIDE DIAMETER1.1250 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONABEC NO.1
SURFACE FINISHGROUND
LOAD DIRECTIONRADIAL
LUBRICATION MATERIALGREASE
SHIELD QUANTITY2
RETAINER FABRICATION METHODPRESSED
INTERNAL FIT-UP DESIGNATIONSTANDARD
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
BORE SHAPESTRAIGHT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 35
FF-B-2844InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
3TAR17-24UInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
5189342InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
1-210761-3InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
30111InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
W5939092PC24InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5071-002?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5071-002?
5071-002 is a BEARING,BALL,ANNULAR.
What parts can replace 5071-002?
There are 35 known substitutes for 5071-002: FF-B-2844, 3TAR17-24U, 5189342 and 32 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5071-002?
5071-002 is cataloged in the Federal Logistics Information System under NSN 3110-00-882-3635. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5071-002

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: October 2026