PartsTable
Technical Data Sheet
50668 ✓ Verified by PartsTable
Sandberg · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
SAS cables have specific lane counts: 4i (internal) or 4e (external) Cable length matters — too short won't reach, too long creates clutter
Verify connector type on BOTH ends — many SAS cables are asymmetric
PRODUCT OVERVIEW

This is no less than a revolution in network cabling. Until now, we have only known UTP cables as round cables, but now new flat cables have been developed that take up significantly less space and are much lighter. Perfect for laying under a carpet, behind a desk or simply to give you less to carry around with your laptop.

Available in trendy black to suit modern computer environments. Used either to connect a computer to a hub/switch or to link two hubs or switches together via the uplink port. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-01-112-1015, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
MRO MRO_GENERAL 50668
NSN: 5999-01-112-1015
FSC: 5999
CAGE: 32155 — POLARA ENGINEERING, INC. (USA)
SPECIFICATIONS
materialCOPPER ALLOY 511 TERMINAL
body_styleRECTANGULAR
body_width0.270 INCHES MAXIMUM IN
body_length0.760 INCHES MAXIMUM IN
voltage_rating50.000 VOLTS NOMINAL
unable_to_decodeUNABLE TO DECODE
mounting_facilityPIN(S)
section_delay_time100.000 NANOSECONDS NOMINAL SINGLE SECTION NS
segment_delay_time10.000 NANOSECONDS NOMINAL SINGLE SECTION ALL SEGMENTS NS
signal_delay_methodLUMPED CONSTANT
operating_temp_range-45.0 TO 110.0 CELSIUS DEGC
input_impedance_rating100.000 OHMS
NSN5999-01-112-1015
COMPONENT DIAGRAM
CONN A SFF-8482 CONN B SFF-8087 LENGTH: SAS CABLE ASSEMBLY | SFF-8482 to SFF-8087 Cable length: | SAS | Shielded TITLE CABLE ASSY PN 50668 MFR Sandberg SEMICONDUCTOR DEVICE SET
KEY FEATURES
MATERIAL: PLASTIC EPOXY CASE
DELAY TIME VARIATION METHOD: TAPPED
SEGMENT DELAY TIME: 10.000 NANOSECONDS NOMINAL SINGLE SECTION ALL SEGMENTS NS
BODY STYLE: RECTANGULAR
BODY LENGTH: 0.760 INCHES MAXIMUM IN
INDIVIDUAL SECTION QUANTITY: 1
VOLTAGE RATING: 50.000 VOLTS NOMINAL
OPERATING TEMP RANGE: -45.0 TO 110.0 CELSIUS DEGC
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALPLASTIC EPOXY CASE
DELAY TIME VARIATION METHODTAPPED
SEGMENT DELAY TIME10.000 NANOSECONDS NOMINAL SINGLE SECTION ALL SEGMENTS NS
BODY STYLERECTANGULAR
BODY LENGTH0.760 INCHES MAXIMUM IN
INDIVIDUAL SECTION QUANTITY1
VOLTAGE RATING50.000 VOLTS NOMINAL
OPERATING TEMP RANGE-45.0 TO 110.0 CELSIUS DEGC
BODY WIDTH0.270 INCHES MAXIMUM IN
PULSE RISE TIME RATING19.0 NANOSECONDS NS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
536177AInterchangeable
interchangeable cross-reference
interchangeable
180110Interchangeable
interchangeable cross-reference
interchangeable
MR619T1C25011Interchangeable
interchangeable cross-reference
interchangeable
11114Interchangeable
interchangeable cross-reference
interchangeable
50668Interchangeable
interchangeable cross-reference
interchangeable
BS48155Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy 50668?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 50668?
50668 is a SEMICONDUCTOR DEVICE SET manufactured by Sandberg. It is classified as a MRO (MRO_GENERAL).
What parts can replace 50668?
There are 7 known substitutes for 50668: 536177A, 180110, MR619T1C25011 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 50668?
50668 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-01-112-1015. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 50668