PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 536177A
536177A ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 0.2362 INCHES NOMINAL IN, overall_width: 0.2360 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-157-0212, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
536177A
NSN: 3110-00-157-0212
FSC: 3110
CAGE: 7PZX0 — FAIRBANKS MORSE, LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter0.2362 INCHES NOMINAL IN
overall_width0.2360 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
overall_outside_diameter0.8750 INCHES NOMINAL IN
internal_fit-up_designationSTANDARD
retainer_fabrication_methodPRESSED
standard_tolerance_designationABEC NO.1
NSN3110-00-157-0212
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 536177A · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE SHAPE: STRAIGHT
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
RETAINER FABRICATION METHOD: PRESSED
•
LOAD DIRECTION: RADIAL
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
MATERIAL: STEEL OVERALL
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
TECHNICAL CHARACTERISTICS (FLIS)
BORE SHAPESTRAIGHT
INTERNAL FIT-UP DESIGNATIONSTANDARD
RETAINER FABRICATION METHODPRESSED
LOAD DIRECTIONRADIAL
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIALSTEEL OVERALL
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
STANDARD TOLERANCE DESIGNATIONABEC NO.1
SURFACE FINISHGROUND
BORE SHAPESTRAIGHT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
K2620Interchangeable
interchangeable cross-reference
interchangeable
4DX8-331Interchangeable
interchangeable cross-reference
interchangeable
X8-331Interchangeable
interchangeable cross-reference
interchangeable
G36Interchangeable
interchangeable cross-reference
interchangeable
7686627Interchangeable
interchangeable cross-reference
interchangeable
514-7612-0431-302Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 536177A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 536177A?
536177A is a BEARING,BALL,ANNULAR.
What parts can replace 536177A?
There are 19 known substitutes for 536177A: K2620, 4DX8-331, X8-331 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 536177A?
536177A is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-157-0212. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 536177A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026