PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5058-1-2
5058-1-2 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.153 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN, diameter: 1.500 INCHES NOMINAL IN, material: STEEL OVERALL, head_style: FLAT, special_features: FURNISHED WITH 1 WASHER AND 1 COTTER PIN, style_designator: STRAIGHT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-272-6750, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5058-1-2
NSN: 5315-00-272-6750
FSC: 5315
CAGE: 02945 — AMERICAN STEEL WORKS INC (USA)
SPECIFICATIONS
height0.153 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
diameter1.500 INCHES NOMINAL IN
materialSTEEL OVERALL
head_styleFLAT
special_featuresFURNISHED WITH 1 WASHER AND 1 COTTER PIN
style_designatorSTRAIGHT
pin_head_diameter3.250 INCHES NOMINAL IN
surface_treatmentPAINT OVERALL
under_head_length5.787 INCHES MINIMUM AND 5.847 INCHES MAXIMUM IN
first_hole_diameter0.406 INCHES NOMINAL IN
hole_arrangement_styleONE END DRILLED
distance_from_centerline_of_hole_to_end_of_pin0.315 INCHES MINIMUM AND 0.435 INCHES MAXIMUM IN
NSN5315-00-272-6750
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5058-1-2 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST HOLE DIAMETER: 0.406 INCHES NOMINAL IN
•
HEAD STYLE: FLAT
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
MATERIAL: STEEL OVERALL
•
HEIGHT: 0.153 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
•
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN: 0.315 INCHES MINIMUM AND 0.435 INCHES MAXIMUM IN
•
DIAMETER: 1.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
FIRST HOLE DIAMETER0.406 INCHES NOMINAL IN
HEAD STYLEFLAT
HOLE ARRANGEMENT STYLEONE END DRILLED
MATERIALSTEEL OVERALL
SPECIAL FEATURESFURNISHED WITH 1 WASHER AND 1 COTTER PIN
HEIGHT0.153 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN0.315 INCHES MINIMUM AND 0.435 INCHES MAXIMUM IN
DIAMETER1.500 INCHES NOMINAL IN
UNDER HEAD LENGTH5.787 INCHES MINIMUM AND 5.847 INCHES MAXIMUM IN
PIN HEAD DIAMETER3.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
112872Interchangeable
interchangeable cross-reference
interchangeable
53055Interchangeable
interchangeable cross-reference
interchangeable
0906820-6Interchangeable
interchangeable cross-reference
interchangeable
760-1211Interchangeable
interchangeable cross-reference
interchangeable
50-5-8Interchangeable
interchangeable cross-reference
interchangeable
225-5-8Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5058-1-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5058-1-2?
5058-1-2 is a PIN,STRAIGHT,HEADED.
What parts can replace 5058-1-2?
There are 19 known substitutes for 5058-1-2: 112872, 53055, 0906820-6 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5058-1-2?
5058-1-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-272-6750. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5058-1-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026