PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 225-5-8
225-5-8 ✓ Verified by PartsTable
schleich · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CUTTER,MILLING,METAL SLITTING is a schleich industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.469 INCHES NOMINAL IN, outside_diameter: 3.376 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE, housing_bore_diameter: 3.371 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-071-1394, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
225-5-8
NSN: 5340-00-071-1394
FSC: 5340
CAGE: 76786 — BUCKLES INTERNATIONAL, INC. (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.469 INCHES NOMINAL IN
outside_diameter3.376 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter3.371 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter2.250 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5340-00-071-1394
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 225-5-8 MFR: schleich ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL HOOK
•
SPECIFICATION/STANDARD DATA: 81205-BACS15A MANUFACTURERS SPECIFICATION
•
UNATTACHED RING: NOT INCLUDED
•
HOOK STYLE DESIGNATOR: SLIDING BOLT
•
RUBBER COVERED FEATURE: NOT INCLUDED
•
DESIGN TYPE: SWIVEL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL HOOK
MATERIALSTEEL CONNECTION END
SPECIFICATION/STANDARD DATA81205-BACS15A MANUFACTURERS SPECIFICATION
UNATTACHED RINGNOT INCLUDED
HOOK STYLE DESIGNATORSLIDING BOLT
RUBBER COVERED FEATURENOT INCLUDED
OVERALL LENGTH3.500 INCHES NOMINAL IN
DESIGN TYPESWIVEL
INSIDE WIDTH0.700 INCHES NOMINAL IN
END CONNECTION STYLESWIVEL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
112872Interchangeable
interchangeable cross-reference
interchangeable
53055Interchangeable
interchangeable cross-reference
interchangeable
0906820-6Interchangeable
interchangeable cross-reference
interchangeable
22540Interchangeable
interchangeable cross-reference
interchangeable
33728Interchangeable
interchangeable cross-reference
interchangeable
00044Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 225-5-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 225-5-8?
225-5-8 is a CUTTER,MILLING,METAL SLITTING manufactured by schleich.
What parts can replace 225-5-8?
There are 22 known substitutes for 225-5-8: 112872, 53055, 0906820-6 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 225-5-8?
225-5-8 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-071-1394. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 225-5-8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026