PartsTable
Technical Data Sheet
PartsTable / MRO / 50548
50548 ✓ Verified by PartsTable
Sandberg · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

This link cable enables you to connect hi-fi components that use an 8-pin link bus. The cable is extra-shielded to achieve optimum sound quality. Key specifications include fsc_application_data: TELETYPE AND FACSIMILE EQUIPMENT, general_characteristics_item_description: STEEL,1/4 HARD.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-2814, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 50548
NSN: 3110-00-227-2814
FSC: 3110
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
fsc_application_dataTELETYPE AND FACSIMILE EQUIPMENT
general_characteristics_item_descriptionSTEEL,1/4 HARD
NSN3110-00-227-2814
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 50548 · Sandberg ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INNER RING WIDTH: 1.2500 INCHES NOMINAL IN
•
SURFACE FINISH: GROUND
•
RETAINER FABRICATION METHOD: PRESSED
•
OUTER RING WIDTH: 1.0490 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
LUBRICATION MATERIAL: GREASE
•
ALIGNMENT TYPE: RIGID
TECHNICAL CHARACTERISTICS (FLIS)
INNER RING WIDTH1.2500 INCHES NOMINAL IN
SURFACE FINISHGROUND
RETAINER FABRICATION METHODPRESSED
SPECIAL FEATURESOIL HOLE AND GROOVE IN INNER AND OUTER RINGS ALSO LOW TEMP GREASE
OUTER RING WIDTH1.0490 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
LUBRICATION MATERIALGREASE
ALIGNMENT TYPERIGID
SURFACE TREATMENTCADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
STYLE DESIGNATORCAM ROLLER, HARDENED AND GROUND, NON-SEPARABLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 34
AS24461Interchangeable
interchangeable cross-reference
interchangeable
505-20Interchangeable
interchangeable cross-reference
interchangeable
MS24461-20Interchangeable
interchangeable cross-reference
interchangeable
3NBC511ZPInterchangeable
interchangeable cross-reference
interchangeable
505-3Interchangeable
interchangeable cross-reference
interchangeable
MS24461-3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 50548?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 50548?
50548 is a PLATE,TELETYPEWRITER RETRACTOR manufactured by Sandberg. It is classified as a MRO (MRO_GENERAL).
What parts can replace 50548?
There are 34 known substitutes for 50548: AS24461, 505-20, MS24461-20 and 31 more. Substitute compatibility should be verified for your specific system.
Is 50548 still available?
50548 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 50548

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026