PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 505-24
505-24 ✓ Verified by PartsTable
Sandberg · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

This adapter enables you to convert a stereo phono signal to mono. The adapter has two female phono jacks to one male phono jack. Key specifications include material: STEEL OVERALL, jaw_depth: 1.250 INCHES NOMINAL IN, thickness: 0.124 INCHES NOMINAL IN, body_style: ANGLE SHAPE, POWER TYPE, shell_type: HOOD, TOP OPENING, bore_diameter: 1.4993 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-2810, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
505-24
NSN: 3110-00-227-2810
FSC: 3110
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
jaw_depth1.250 INCHES NOMINAL IN
thickness0.124 INCHES NOMINAL IN
body_styleANGLE SHAPE, POWER TYPE
shell_typeHOOD, TOP OPENING
bore_diameter1.4993 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN
carrying_casePROVIDED
hole_diameter0.408 INCHES NOMINAL IN
terminal_typeSCREW SINGLE MATING END SINGLE CONTACT GROUPING
alignment_typeRIGID
shell_materialALUMINUM ALLOY
surface_finishGROUND
NSN3110-00-227-2810
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 505-24 · Sandberg ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 1.4993 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN
•
ALIGNMENT TYPE: RIGID
•
INNER RING WIDTH: 1.2500 INCHES NOMINAL IN
•
LUBRICATION MATERIAL: GREASE
•
SURFACE FINISH: GROUND
•
RETAINER FABRICATION METHOD: PRESSED
•
OUTER RING WIDTH: 1.0490 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER1.4993 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN
ALIGNMENT TYPERIGID
INNER RING WIDTH1.2500 INCHES NOMINAL IN
LUBRICATION MATERIALGREASE
SURFACE FINISHGROUND
SPECIAL FEATURESOIL HOLE AND GROOVE IN OUTER AND INNER RINGS
RETAINER FABRICATION METHODPRESSED
OUTER RING WIDTH1.0490 INCHES NOMINAL IN
MATERIALSTEEL COMP E52100 OR STEEL COMP 8620 OR STEEL OR STEEL COMP E50100 OR STEEL COMP E51100 OVERALL
OVERALL OUTSIDE DIAMETER2.2500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 34
AS24461Interchangeable
interchangeable cross-reference
interchangeable
505-20Interchangeable
interchangeable cross-reference
interchangeable
MS24461-20Interchangeable
interchangeable cross-reference
interchangeable
3NBC511ZPInterchangeable
interchangeable cross-reference
interchangeable
505-3Interchangeable
interchangeable cross-reference
interchangeable
MS24461-3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 505-24?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 505-24?
505-24 is a CONNECTOR,RECEPTACLE,ELECTRICAL manufactured by Sandberg.
What parts can replace 505-24?
There are 34 known substitutes for 505-24: AS24461, 505-20, MS24461-20 and 31 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 505-24?
505-24 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-2810. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 505-24

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026