PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 50452
50452 ✓ Verified by PartsTable
Sandberg · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

Connector for standard 9.5 mm aerial cables. Two aerial cables with female connectors can be joined to make one long cable with this male-male connector. Key specifications include phase: THREE SINGLE VOLTAGE, length: 30.000 INCHES NOMINAL IN, material: STEEL COMP 304 SHEATH, body_style: FINNED, TUBULAR, U SHAPED, body_width: 2.125 INCHES MAXIMUM IN, case_style: SQUARE.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-641-2251, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
50452
NSN: 5330-00-641-2251
FSC: 5330
CAGE: 76680 — FEDERAL-MOGUL CORP CHASSIS PRODUCTS DIV (USA)
SPECIFICATIONS
phaseTHREE SINGLE VOLTAGE
length30.000 INCHES NOMINAL IN
materialSTEEL COMP 304 SHEATH
body_styleFINNED, TUBULAR, U SHAPED
body_width2.125 INCHES MAXIMUM IN
case_styleSQUARE
seal_width0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
body_height3.182 INCHES MAXIMUM IN
body_length2.250 INCHES MAXIMUM IN
heat_quantity1
rating_methodELECTRICAL SINGLE COMPONENT SINGLE WINDING
inclosure_typeFULLY INCLOSED
NSN5330-00-641-2251
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 50452 MFR: Sandberg ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
HOUSING BORE DIAMETER: 2.835 INCHES NOMINAL IN
•
MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
•
SEALING ELEMENT STYLE: ANGULAR
•
CASE STYLE: SQUARE
•
SEAL WIDTH: 0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
ACCOMMODATED SHAFT DIAMETER: 1.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
HOUSING BORE DIAMETER2.835 INCHES NOMINAL IN
MATERIALLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
SEALING ELEMENT STYLEANGULAR
CASE STYLESQUARE
SEAL WIDTH0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
ACCOMMODATED SHAFT DIAMETER1.375 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
5044-1Interchangeable
interchangeable cross-reference
interchangeable
YR33Interchangeable
interchangeable cross-reference
interchangeable
X04584Interchangeable
interchangeable cross-reference
interchangeable
97-6Interchangeable
interchangeable cross-reference
interchangeable
25057Interchangeable
interchangeable cross-reference
interchangeable
3954Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 50452?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 50452?
50452 is a CONNECTING LINK,RIGID manufactured by Sandberg.
What parts can replace 50452?
There are 20 known substitutes for 50452: 5044-1, YR33, X04584 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 50452?
50452 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-641-2251. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 50452

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026