PartsTable
Technical Data Sheet
50441 ✓ Verified by PartsTable
Sandberg · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

This optical network cable is used to connect network devices with fibre-optic connectors. The cable uses a 50/125 multi-mode micron optical fibre, which is economical but also gives the cable a long range (used in connection with extension equipment). The cable can be used with the current 100/1000/10000 Mbit Ethernet standards and other network topologies that support ST connectors.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-140-2197, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO MRO_GENERAL 50441
NSN: 5330-00-140-2197
FSC: 5330
CAGE: 60285 — EATON CORPORATION DBA JACKSON PLANT (USA)
SPECIFICATIONS
materialASBESTOS AND COPPER OVERALL
vial_typeLEVEL BUBBLE
case_styleSQUARE
seal_width0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
body_length0.200 INCHES MAXIMUM IN
design_typeSINGLE FACE
thread_class3A NUT THREAD A
adjustabilityADJUSTABLE
body_diameter0.335 INCHES MINIMUM AND 0.370 INCHES MAXIMUM IN
terminal_typePIN
thread_length0.875 INCHES MINIMUM STUD THREAD IN
vial_quantity1 CROSS LEVEL
NSN5330-00-140-2197
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 50441 MFR: Sandberg ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESCROSS-SECTIONAL SHAPE STYLE:116 IRREGULAR SHAPE FROM OLD FIIG A03200
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
50441Interchangeable
interchangeable cross-reference
interchangeable
YR33Interchangeable
interchangeable cross-reference
interchangeable
X04584Interchangeable
interchangeable cross-reference
interchangeable
97-6Interchangeable
interchangeable cross-reference
interchangeable
25057Interchangeable
interchangeable cross-reference
interchangeable
3954Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 50441?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 50441?
50441 is a RESISTOR NETWORK,FIXED,FILM manufactured by Sandberg. It is classified as a MRO (MRO_GENERAL).
What parts can replace 50441?
There are 18 known substitutes for 50441: 50441, YR33, X04584 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 50441?
50441 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-140-2197. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 50441