PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 50410L25
50410L25 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: LEATHER SEALING ELEMENT, case_style: SQUARE, seal_width: 0.500 INCHES NOMINAL IN, surface_treatment: ANODIZE CASE, housing_bore_diameter: 2.623 INCHES NOMINAL IN, sealing_element_style: ANGULAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-250-5748, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
50410L25
NSN: 5330-00-250-5748
FSC: 5330
CAGE: 76680 — FEDERAL-MOGUL CORP CHASSIS PRODUCTS DIV (USA)
SPECIFICATIONS
materialLEATHER SEALING ELEMENT
case_styleSQUARE
seal_width0.500 INCHES NOMINAL IN
surface_treatmentANODIZE CASE
housing_bore_diameter2.623 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter2.000 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-250-5748
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 50410L25 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.500 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
ACCOMMODATED SHAFT DIAMETER: 2.000 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 2.623 INCHES NOMINAL IN
•
MATERIAL: LEATHER SEALING ELEMENT
•
CASE STYLE: SQUARE
•
SURFACE TREATMENT: ANODIZE CASE
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH0.500 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
ACCOMMODATED SHAFT DIAMETER2.000 INCHES NOMINAL IN
HOUSING BORE DIAMETER2.623 INCHES NOMINAL IN
MATERIALLEATHER SEALING ELEMENT
MATERIALALUMINUM ALLOY CASE
CASE STYLESQUARE
SURFACE TREATMENTANODIZE CASE
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
AS24464-10Interchangeable
interchangeable cross-reference
interchangeable
AS24464Interchangeable
interchangeable cross-reference
interchangeable
10NBK1628YZPInterchangeable
interchangeable cross-reference
interchangeable
50410Interchangeable
interchangeable cross-reference
interchangeable
778-10Interchangeable
interchangeable cross-reference
interchangeable
80-4-10Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 50410L25?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 50410L25?
50410L25 is a SEAL,PLAIN ENCASED.
What parts can replace 50410L25?
There are 6 known substitutes for 50410L25: AS24464-10, AS24464, 10NBK1628YZP and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 50410L25?
50410L25 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-250-5748. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 50410L25

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026