PartsTable
Technical Data Sheet
Download PDF

502757 — SPRING,HELICAL,COMPRESSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

502757: SPRING,HELICAL,COMPRESSION.

The SPRING,HELICAL,COMPRESSION is a the manufacturer industrial component. Key specifications include end_style: SPRING END,SQUARED OVERALL, special_features: STOCK SHAPE: ROUND; MATERIAL: WIRE; REFERENCE DATA: T.O. 6J15-7-54-3, FIGURE 10-1, INDEX 16, style_designator: CYLINDRICAL, coil_helix_direction: RIGHT-HAND, end_item_identification: FUEL AND AIR SOLENOID VALVE POPPET; END ITEM NSN 4810-01-056-8603 AND 4810-01-061-6088; F-16A/B ACFT A.

This part is cataloged in the U.S. Government catalog under NSN 5340-00-050-2757, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
502757
NSN: 5340-00-050-2757
NIINs: 000502757, 012308019
FSC: 5340 — Hardware, Commercial
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
end_styleSPRING END,SQUARED OVERALL
special_featuresSTOCK SHAPE: ROUND; MATERIAL: WIRE; REFERENCE DATA: T.O. 6J15-7-54-3, FIGURE 10-1, INDEX 16
style_designatorCYLINDRICAL
coil_helix_directionRIGHT-HAND
end_item_identificationFUEL AND AIR SOLENOID VALVE POPPET; END ITEM NSN 4810-01-056-8603 AND 4810-01-061-6088; F-16A/B ACFT A
NSN5340-00-050-2757
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 502757 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CUSHIONING ENVIRONMENTAL PROTECTION: OIL RESISTANT
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/5 T3 FED SPEC 1ST MATERIAL RESPONSE BAND
•
DIAMETER: 0.204 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.051 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.141 INCHES NOMINAL IN
•
SURFACE TREATMENT: ANODIZE BAND
TECHNICAL CHARACTERISTICS
CUSHIONING ENVIRONMENTAL PROTECTIONOIL RESISTANT
STYLE DESIGNATORSINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/5 T3 FED SPEC 1ST MATERIAL RESPONSE BAND
DIAMETER0.204 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.051 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.141 INCHES NOMINAL IN
SURFACE TREATMENTANODIZE BAND
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.922 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY BAND
SUBSTITUTES & CROSS-REFERENCES 3
NASM21322-45Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS21322-45Reference document
Same NSN cross-reference
Reference document — Secondary reference
NASM21322Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 502757?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 502757?
502757 is a SPRING,HELICAL,COMPRESSION.
What parts can replace 502757?
There are 3 known substitutes for 502757: NASM21322-45, MS21322-45, NASM21322. Substitute compatibility should be verified for your specific system.
What is the NSN for 502757?
502757 is cataloged in the U.S. Government catalog under NSN 5340-00-050-2757. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 502757