Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.203 INCHES NOMINAL IN, material: ALUMINUM ALLOY OVERALL, loop_width: 4.000 INCHES NOMINAL IN, loop_length: 2.500 INCHES NOMINAL IN, overall_width: 0.500 INCHES NOMINAL IN, special_features: CUSHION MATERIAL;SYNTHETIC RUBBER PER MIL-R-3065. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-008-5795, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
NASM21322
NSN:5340-00-008-5795 FSC:5340 CAGE:80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
diameter
0.203 INCHES NOMINAL IN
material
ALUMINUM ALLOY OVERALL
loop_width
4.000 INCHES NOMINAL IN
loop_length
2.500 INCHES NOMINAL IN
overall_width
0.500 INCHES NOMINAL IN
special_features
CUSHION MATERIAL;SYNTHETIC RUBBER PER MIL-R-3065
style_designator
SINGLE LOOP
tongue_hole_type
ROUND, UNTHREADED
material_diameter
0.064 INCHES NOMINAL IN
surface_treatment
ANODIZE OVERALL
material_thickness
0.064 INCHES NOMINAL IN
loop_inside_diameter
0.375 INCHES NOMINAL IN
NSN
5340-00-008-5795
COMPONENT DIAGRAM
KEY FEATURES
•
DIAMETER: 0.203 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.438 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL: ALUMINUM ALLOY BAND
•
MATERIAL THICKNESS: 0.064 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 2.125 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.657 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
DIAMETER
0.203 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE
1.438 INCHES NOMINAL IN
STYLE DESIGNATOR
SINGLE LOOP
MATERIAL
ALUMINUM ALLOY BAND
MATERIAL THICKNESS
0.064 INCHES NOMINAL IN
OVERALL WIDTH
0.500 INCHES NOMINAL IN
LOOP INSIDE DIAMETER
2.125 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END
1.657 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
MIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE BAND
MATERIAL DOCUMENT AND CLASSIFICATION
QQ-A-250/5,TEMPER T3 OR T4 FED SPEC ALL MATERIAL RESPONSES BAND
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NASM21322?
NASM21322 is a CLAMP,LOOP.
What parts can replace NASM21322?
There is 1 known substitute for NASM21322: MS21322-53. Substitute compatibility should be verified for your specific system.
What is the NSN for NASM21322?
NASM21322 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-008-5795. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.