PartsTable
Technical Data Sheet
PartsTable / MRO / 50255
50255 ✓ Verified by PartsTable
Sandberg · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

LVD (the latest SCSI-based standard) cable for high-speed data transfer. At one end of the cable is a 68-pin mini Centronics standard connector (Compressed Centronics or VHD Centronics). The other end has an HP-mini type 68-pin connector.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-3399, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 50255
NSN: 5315-00-010-3399
FSC: 5315
CAGE: 34623 — AM GENERAL LLC (USA)
SPECIFICATIONS
special_featuresMOUNTING CONFIGURATION: TWO 0.125 INCH DIAMETER MOUNTING HOLES, ONE SLOT IN
component_type_and_quantity1 BRACKET AND 2 MOUNT AND 2 RIVET AND 1 SPRING
NSN5315-00-010-3399
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 50255 · Sandberg ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL COMP 1008 OVERALL
•
STYLE DESIGNATOR: STANDARD
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
DIAMETER: 0.156 INCHES NOMINAL IN
•
UNDERLOOP LENGTH: 1.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL COMP 1008 OVERALL
STYLE DESIGNATORSTANDARD
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
DIAMETER0.156 INCHES NOMINAL IN
UNDERLOOP LENGTH1.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
37-104Interchangeable
interchangeable cross-reference
interchangeable
50255Interchangeable
interchangeable cross-reference
interchangeable
DV15Interchangeable
interchangeable cross-reference
interchangeable
24293Interchangeable
interchangeable cross-reference
interchangeable
SC-B-69561Interchangeable
interchangeable cross-reference
interchangeable
50255AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 50255?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 50255?
50255 is a TELETYPEWRITER SUBASSEMBLY manufactured by Sandberg. It is classified as a MRO (MRO_GENERAL).
What parts can replace 50255?
There are 16 known substitutes for 50255: 37-104, 50255, DV15 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 50255?
50255 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-3399. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 50255

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026