PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 910259
910259 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL OVERALL, cone_width: 0.6600 INCHES NOMINAL IN, bore_diameter: 1.2500 INCHES NOMINAL IN, special_features: DUTY CLASS LM SERIES,BACK FACE CORNER RADIUS ON 0.2180 IN. RADIUS ON ROLLER IN, style_designator: NORMAL ANGLE, cone_corner_radius: 0.0930 INCHES NOMINAL IN.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-3399, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
910259
NSN: 5315-00-010-3399
FSC: 5315
CAGE: 92392 — ALLIS-CHALMERS CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cone_width0.6600 INCHES NOMINAL IN
bore_diameter1.2500 INCHES NOMINAL IN
special_featuresDUTY CLASS LM SERIES,BACK FACE CORNER RADIUS ON 0.2180 IN. RADIUS ON ROLLER IN
style_designatorNORMAL ANGLE
cone_corner_radius0.0930 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
NSN5315-00-010-3399
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 910259 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL COMP 1008 OVERALL
•
STYLE DESIGNATOR: STANDARD
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
DIAMETER: 0.156 INCHES NOMINAL IN
•
UNDERLOOP LENGTH: 1.750 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL COMP 1008 OVERALL
STYLE DESIGNATORSTANDARD
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
DIAMETER0.156 INCHES NOMINAL IN
UNDERLOOP LENGTH1.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
37-104Interchangeable
interchangeable cross-reference
interchangeable
50255Interchangeable
interchangeable cross-reference
interchangeable
DV15Interchangeable
interchangeable cross-reference
interchangeable
24293Interchangeable
interchangeable cross-reference
interchangeable
SC-B-69561Interchangeable
interchangeable cross-reference
interchangeable
50255AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 910259?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 910259?
910259 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace 910259?
There are 15 known substitutes for 910259: 37-104, 50255, DV15 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 910259?
910259 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-3399. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 910259

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026