PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 501-5203068 ITEM 54
501-5203068 ITEM 54 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.199 INCHES NOMINAL IN, material: ALUMINUM ALLOY 2024 BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.040 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-825-0916, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
501-5203068 ITEM 54
NSN: 5340-00-825-0916
FSC: 5340
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
diameter0.199 INCHES NOMINAL IN
materialALUMINUM ALLOY 2024 BAND
overall_width0.500 INCHES NOMINAL IN
style_designatorOFFSET MOUNT
tongue_hole_typeROUND, UNTHREADED
material_thickness0.040 INCHES NOMINAL IN
loop_inside_diameter0.500 INCHES NOMINAL IN
material_document_and_classificationQQ-A-250/5 T3 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end0.920 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.670 INCHES NOMINAL IN
NSN5340-00-825-0916
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 501-5203068 ITEM 54 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.040 INCHES NOMINAL IN
•
DIAMETER: 0.199 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 0.500 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/5 T3 FED SPEC SINGLE MATERIAL RESPONSE BAND
•
STYLE DESIGNATOR: OFFSET MOUNT
•
MATERIAL: ALUMINUM ALLOY 2024 BAND
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.670 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.040 INCHES NOMINAL IN
DIAMETER0.199 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.500 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/5 T3 FED SPEC SINGLE MATERIAL RESPONSE BAND
STYLE DESIGNATOROFFSET MOUNT
MATERIALALUMINUM ALLOY 2024 BAND
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.670 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.920 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
NP71922ESPC109Interchangeable
interchangeable cross-reference
interchangeable
19-136Interchangeable
interchangeable cross-reference
interchangeable
WT2200BPCWT2214Interchangeable
interchangeable cross-reference
interchangeable
70398Interchangeable
interchangeable cross-reference
interchangeable
J10-1000-300Interchangeable
interchangeable cross-reference
interchangeable
L37-152Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 501-5203068 ITEM 54?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 501-5203068 ITEM 54?
501-5203068 ITEM 54 is a CLAMP,LOOP.
What parts can replace 501-5203068 ITEM 54?
There are 9 known substitutes for 501-5203068 ITEM 54: NP71922ESPC109, 19-136, WT2200BPCWT2214 and 6 more. Substitute compatibility should be verified for your specific system.
Is 501-5203068 ITEM 54 still available?
501-5203068 ITEM 54 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 501-5203068 ITEM 54

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026