PartsTable
Technical Data Sheet
70398 ✓ Verified by PartsTable
Lindy · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

<b>Supports high speed data transmissions of up to 400Mbit/sec!</b><br>The LINDY FireWire 800 Adapter allows standard 4 Pin FireWire cables to be used with FireWire 800 ports on new Mac computers. Key specifications include material: PLASTIC CASE, power_source: EXTERNAL, end_item_identification: SHELTER N8S-842/G, maximum_voltage_rating_in_volts: 24.0 AC. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-012-0367, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
70398
NSN: 5310-00-012-0367
FSC: 5310
CAGE: 15434 — CUMMINS INC. (USA)
SPECIFICATIONS
materialPLASTIC CASE
power_sourceEXTERNAL
end_item_identificationSHELTER N8S-842/G
maximum_voltage_rating_in_volts24.0 AC
NSN5310-00-012-0367
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 70398 · Lindy ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
THREAD CLASS: 2B
NUT HEIGHT: 0.212 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
THREAD SERIES: UNF
THREAD QUANTITY PER INCH: 28
NOMINAL THREAD SIZE: 0.250 INCHES IN
BEARING SURFACE TYPE: CHAMFERED OR WASHER FACED
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
THREAD CLASS2B
NUT HEIGHT0.212 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
THREAD SERIESUNF
THREAD QUANTITY PER INCH28
NOMINAL THREAD SIZE0.250 INCHES IN
BEARING SURFACE TYPECHAMFERED OR WASHER FACED
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
MATERIALSTEEL OVERALL
THREAD DIRECTIONRIGHT-HAND
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OR QQ-Z-325,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
70398Interchangeable
interchangeable cross-reference
interchangeable
FFB571AInterchangeable
interchangeable cross-reference
interchangeable
A-A-2329Interchangeable
interchangeable cross-reference
interchangeable
GGG-F-325 TY27CL1STAInterchangeable
interchangeable cross-reference
interchangeable
19136Interchangeable
interchangeable cross-reference
interchangeable
60-6-10Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 70398?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 70398?
70398 is a SCREEN,BREATHER HOU manufactured by Lindy.
What parts can replace 70398?
There are 26 known substitutes for 70398: 70398, FFB571A, A-A-2329 and 23 more. Substitute compatibility should be verified for your specific system.
Is 70398 still available?
70398 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 70398