PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 500295
500295 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include special_features: HAND CONTROL, end_item_identification: X-RAY APPARATUS,RADIOGRAPHIC,MEDICAL; MODEL 9170. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-350-9940, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
500295
NSN: 5330-00-350-9940
FSC: 5330
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
special_featuresHAND CONTROL
end_item_identificationX-RAY APPARATUS,RADIOGRAPHIC,MEDICAL; MODEL 9170
NSN5330-00-350-9940
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 500295 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CASE STYLE: SQUARE
•
MATERIAL: STEEL CASE
•
HOUSING BORE DIAMETER: 1.374 INCHES MINIMUM AND 1.376 INCHES MAXIMUM IN
•
SEAL WIDTH: 0.516 INCHES MINIMUM AND 0.546 INCHES MAXIMUM IN
•
SEALING ELEMENT STYLE: ANGULAR
•
ACCOMMODATED SHAFT DIAMETER: 0.812 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 1600 FEET PER MINUTE FT
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLESQUARE
MATERIALSTEEL CASE
MATERIALLEATHER AND RUBBER SYNTHETIC SEALING ELEMENT
HOUSING BORE DIAMETER1.374 INCHES MINIMUM AND 1.376 INCHES MAXIMUM IN
SEAL WIDTH0.516 INCHES MINIMUM AND 0.546 INCHES MAXIMUM IN
SEALING ELEMENT STYLEANGULAR
ACCOMMODATED SHAFT DIAMETER0.812 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED1600 FEET PER MINUTE FT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
914534Interchangeable
interchangeable cross-reference
interchangeable
11943AInterchangeable
interchangeable cross-reference
interchangeable
1431Interchangeable
interchangeable cross-reference
interchangeable
RIXS152Interchangeable
interchangeable cross-reference
interchangeable
500231Interchangeable
interchangeable cross-reference
interchangeable
S6106Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 500295?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 500295?
500295 is a SEAL,PLAIN ENCASED.
What parts can replace 500295?
There are 18 known substitutes for 500295: 914534, 11943A, 1431 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 500295?
500295 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-350-9940. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 500295

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026