PartsTable
Technical Data Sheet
RIXS152 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: LEATHER AND RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.516 INCHES MINIMUM AND 0.546 INCHES MAXIMUM IN, housing_bore_diameter: 1.374 INCHES MINIMUM AND 1.376 INCHES MAXIMUM IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 0.812 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-177-9721, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
RIXS152
NSN: 5330-00-177-9721
FSC: 5330
CAGE: 00000
SPECIFICATIONS
materialLEATHER AND RUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.516 INCHES MINIMUM AND 0.546 INCHES MAXIMUM IN
housing_bore_diameter1.374 INCHES MINIMUM AND 1.376 INCHES MAXIMUM IN
sealing_element_styleANGULAR
accommodated_shaft_diameter0.812 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed1600 FEET PER MINUTE FT
NSN5330-00-177-9721
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: RIXS152 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
SEALING ELEMENT STYLE: ANGULAR
CASE STYLE: SQUARE
ACCOMMODATED SHAFT DIAMETER: 1.000 INCHES NOMINAL IN
HOUSING BORE DIAMETER: 1.437 INCHES NOMINAL IN
MATERIAL: STEEL CASE
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
SEAL WIDTH: 0.391 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SEALING ELEMENT STYLEANGULAR
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER1.000 INCHES NOMINAL IN
HOUSING BORE DIAMETER1.437 INCHES NOMINAL IN
MATERIALSTEEL CASE
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
SEAL WIDTH0.391 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 31
0BT49368Interchangeable
interchangeable cross-reference
interchangeable
4RL0137Interchangeable
interchangeable cross-reference
interchangeable
84657Interchangeable
interchangeable cross-reference
interchangeable
674-0123-010Interchangeable
interchangeable cross-reference
interchangeable
59T13F1061Interchangeable
interchangeable cross-reference
interchangeable
43885Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy RIXS152?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is RIXS152?
RIXS152 is a SEAL,PLAIN ENCASED.
What parts can replace RIXS152?
There are 31 known substitutes for RIXS152: 0BT49368, 4RL0137, 84657 and 28 more. Substitute compatibility should be verified for your specific system.
Is RIXS152 still available?
RIXS152 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — RIXS152