PartsTable
Technical Data Sheet
500-160 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CABLE ASSEMBLY,SPECIAL PURPOSE,E. Key specifications include material: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT, duty_type: HEAVY, jaw_depth: 1.570 INCHES NOMINAL IN, case_style: SQUARE, seal_width: 0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN, carrying_case: NOT PROVIDED. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-641-2330, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
500-160
NSN: 5330-00-641-2330
FSC: 5330
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
materialLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
duty_typeHEAVY
jaw_depth1.570 INCHES NOMINAL IN
case_styleSQUARE
seal_width0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
carrying_caseNOT PROVIDED
overall_length3.0 METERS
accuracy_rating0.001 INCHES IN
operation_methodHYDRAULIC
special_featuresDIGITAL DISPLAY; INCH/METRIC MEASUREMENTS; BATTERY IS SILVER OXIDE CELL SR-44
termination_typeCONNECTOR PLUG BOTH ENDS ALL CONDUCTORS
measurement_systemMETRIC
NSN5330-00-641-2330
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 500-160 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
CASE STYLE: SQUARE
SEALING ELEMENT STYLE: ANGULAR
SEAL WIDTH: 0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
HOUSING BORE DIAMETER: 3.623 INCHES NOMINAL IN
MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
ACCOMMODATED SHAFT DIAMETER: 2.500 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLESQUARE
SEALING ELEMENT STYLEANGULAR
SEAL WIDTH0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
HOUSING BORE DIAMETER3.623 INCHES NOMINAL IN
MATERIALLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
ACCOMMODATED SHAFT DIAMETER2.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
11611Interchangeable
interchangeable cross-reference
interchangeable
00911611Interchangeable
interchangeable cross-reference
interchangeable
9-11611Interchangeable
interchangeable cross-reference
interchangeable
SM-B-148637Interchangeable
interchangeable cross-reference
interchangeable
07-241Interchangeable
interchangeable cross-reference
interchangeable
201-77193Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 500-160?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 500-160?
500-160 is a CABLE ASSEMBLY,SPECIAL PURPOSE,E.
What parts can replace 500-160?
There are 25 known substitutes for 500-160: 11611, 00911611, 9-11611 and 22 more. Substitute compatibility should be verified for your specific system.
Is 500-160 still available?
500-160 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 500-160