PartsTable / COMPONENT / 50-222
50-222
✓ Verified by PartsTable
Sandberg · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
This extension cable enables you to extend Danish 3-pin telephone cables. The cable has a male to female configuration. The male connector is a combined male and female, to allow an extra telephone cable to be attached to the back of the connector.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-073-3107, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
50-222
NSN: 5340-00-073-3107 FSC: 5340 CAGE: 56063 — INTERPLEX NASCAL INC (USA)
SPECIFICATIONS
color GREEN shape ROUND width 3.283 INCHES NOMINAL IN length 18.000 INCHES NOMINAL IN diameter 0.313 INCHES NOMINAL IN material STEEL body_width 3.625 INCHES NOMINAL IN case_style SQUARE lens_color RED seal_width 0.406 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN body_height 3.000 INCHES NOMINAL IN body_length 6.438 INCHES NOMINAL IN NSN 5340-00-073-3107
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 50-222
MFR: Sandberg
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• MATERIAL THICKNESS: 0.046 INCHES NOMINAL IN
• STYLE DESIGNATOR: CENTER MOUNT
• SURFACE TREATMENT: PASSIVATE BAND
• CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.630 INCHES NOMINAL IN
• MATERIAL: STEEL COMP 302 BAND
• DISTANCE FROM LOOP CENTER TO TONGUE END: 0.789 INCHES NOMINAL IN
• NOMINAL THREAD SIZE: 0.086 INCHES IN
TYPICAL APPLICATIONS
Server Internal Cabling
Data Center Cable Infrastructure
SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH 0.210 INCHES NOMINAL IN MATERIAL THICKNESS 0.046 INCHES NOMINAL IN STYLE DESIGNATOR CENTER MOUNT SURFACE TREATMENT PASSIVATE BAND CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE 0.630 INCHES NOMINAL IN MATERIAL STEEL COMP 302 BAND DISTANCE FROM LOOP CENTER TO TONGUE END 0.789 INCHES NOMINAL IN NOMINAL THREAD SIZE 0.086 INCHES IN DISTANCE FROM LOOP CENTER TO SHORT TONGUE END 0.742 INCHES NOMINAL IN LOOP INSIDE DIAMETER 1.059 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
48637 Interchangeable interchangeable cross-reference
interchangeable
3238996 Interchangeable interchangeable cross-reference
interchangeable
AN3156-3 Interchangeable interchangeable cross-reference
interchangeable
56-3 Interchangeable interchangeable cross-reference
interchangeable
PR406-3 Interchangeable interchangeable cross-reference
interchangeable
50222 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 50-222?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 50-222?
50-222 is a CABLE ASSEMBLY,RADIO FREQUENCY manufactured by Sandberg.
What parts can replace 50-222?
There are 19 known substitutes for 50-222: 48637, 3238996, AN3156-3 and 16 more. Substitute compatibility should be verified for your specific system.
Is 50-222 still available?
50-222 is currently cancelled.