PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 48637
48637 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE, inside_diameter: 2.768 INCHES NOMINAL IN, outside_diameter: 2.882 INCHES NOMINAL IN, special_features: FLANGE OUTSIDE DIAMETER 2.045; HOLE OUTSIDE 0.125 IN. DIA IN, overall_thickness: 2.965 INCHES NOMINAL IN.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-141-4199, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
48637
NSN: 5330-00-141-4199
FSC: 5330
CAGE: 79150 — DANA AUTOMOTIVE SYSTEMS GROUP, LLC DBA DANA SEALING PRODUCTS (USA)
SPECIFICATIONS
materialPLASTIC POLYTETRAFLUOROETHYLENE
inside_diameter2.768 INCHES NOMINAL IN
outside_diameter2.882 INCHES NOMINAL IN
special_featuresFLANGE OUTSIDE DIAMETER 2.045; HOLE OUTSIDE 0.125 IN. DIA IN
overall_thickness2.965 INCHES NOMINAL IN
NSN5330-00-141-4199
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 48637 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEALING ELEMENT STYLE: ANGULAR
•
ACCOMMODATED SHAFT DIAMETER: 0.750 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 1.752 INCHES NOMINAL IN
•
MAXIMUM PRESSURE RATING: 7.0 POUNDS PER SQUARE INCH (PSI) LBS
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT B
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
TECHNICAL CHARACTERISTICS (FLIS)
SEALING ELEMENT STYLEANGULAR
ACCOMMODATED SHAFT DIAMETER0.750 INCHES NOMINAL IN
HOUSING BORE DIAMETER1.752 INCHES NOMINAL IN
MAXIMUM PRESSURE RATING7.0 POUNDS PER SQUARE INCH (PSI) LBS
MATERIALRUBBER SYNTHETIC SEALING ELEMENT B
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
CASE STYLESQUARE
MATERIALLEATHER SEALING ELEMENT A
SEAL WIDTH0.406 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
10049313-1Interchangeable
interchangeable cross-reference
interchangeable
10049313Interchangeable
interchangeable cross-reference
interchangeable
5022-2Interchangeable
interchangeable cross-reference
interchangeable
23034Interchangeable
interchangeable cross-reference
interchangeable
T-100-SMInterchangeable
interchangeable cross-reference
interchangeable
53534Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 48637?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 48637?
48637 is a SEAL,PLAIN ENCASED.
What parts can replace 48637?
There are 29 known substitutes for 48637: 10049313-1, 10049313, 5022-2 and 26 more. Substitute compatibility should be verified for your specific system.
Is 48637 still available?
48637 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 48637

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026