PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 50-22-2
50-22-2 ✓ Verified by PartsTable
Sandberg · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

This extension cable enables you to extend Danish 3-pin telephone cables. The cable has a male to female configuration. The male connector is a combined male and female, to allow an extra telephone cable to be attached to the back of the connector.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-073-3107, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
50-22-2
NSN: 5340-00-073-3107
FSC: 5340
CAGE: 56063 — INTERPLEX NASCAL INC (USA)
SPECIFICATIONS
colorGREEN
shapeROUND
width3.283 INCHES NOMINAL IN
length18.000 INCHES NOMINAL IN
diameter0.313 INCHES NOMINAL IN
materialSTEEL
body_width3.625 INCHES NOMINAL IN
case_styleSQUARE
lens_colorRED
seal_width0.406 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN
body_height3.000 INCHES NOMINAL IN
body_length6.438 INCHES NOMINAL IN
NSN5340-00-073-3107
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 50-22-2 MFR: Sandberg ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.046 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CENTER MOUNT
•
SURFACE TREATMENT: PASSIVATE BAND
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.630 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 302 BAND
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.789 INCHES NOMINAL IN
•
NOMINAL THREAD SIZE: 0.086 INCHES IN
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.210 INCHES NOMINAL IN
MATERIAL THICKNESS0.046 INCHES NOMINAL IN
STYLE DESIGNATORCENTER MOUNT
SURFACE TREATMENTPASSIVATE BAND
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.630 INCHES NOMINAL IN
MATERIALSTEEL COMP 302 BAND
DISTANCE FROM LOOP CENTER TO TONGUE END0.789 INCHES NOMINAL IN
NOMINAL THREAD SIZE0.086 INCHES IN
DISTANCE FROM LOOP CENTER TO SHORT TONGUE END0.742 INCHES NOMINAL IN
LOOP INSIDE DIAMETER1.059 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
48637Interchangeable
interchangeable cross-reference
interchangeable
3238996Interchangeable
interchangeable cross-reference
interchangeable
AN3156-3Interchangeable
interchangeable cross-reference
interchangeable
56-3Interchangeable
interchangeable cross-reference
interchangeable
PR406-3Interchangeable
interchangeable cross-reference
interchangeable
50222Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 50-22-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 50-22-2?
50-22-2 is a CABLE ASSEMBLY,RADIO FREQUENCY manufactured by Sandberg.
What parts can replace 50-22-2?
There are 19 known substitutes for 50-22-2: 48637, 3238996, AN3156-3 and 16 more. Substitute compatibility should be verified for your specific system.
Is 50-22-2 still available?
50-22-2 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 50-22-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026