PartsTable
Technical Data Sheet
PartsTable / MRO / 482530
482530 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

CAPACITOR,VARIABLE,AIR DIELECTRI. Key specifications include height: 0.083 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN, diameter: 0.243 INCHES MINIMUM AND 0.248 INCHES MAXIMUM IN, material: STEEL COMP 1010 OR STEEL COMP 1112 OVERALL, head_style: FLAT, shaft_type: ROUND SINGLE SHAFT, shaft_length: 1.750 INCHES NOMINAL SECOND SHAFT IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-276-5365, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 482530
NSN: 5315-00-276-5365
FSC: 5315
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
height0.083 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
diameter0.243 INCHES MINIMUM AND 0.248 INCHES MAXIMUM IN
materialSTEEL COMP 1010 OR STEEL COMP 1112 OVERALL
head_styleFLAT
shaft_typeROUND SINGLE SHAFT
shaft_length1.750 INCHES NOMINAL SECOND SHAFT IN
chamfer_length0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN
inclosure_typeUNINCLOSED
overall_length8.438 INCHES NOMINAL IN
shaft_diameter0.375 INCHES NOMINAL SECOND SHAFT IN
style_designatorSTRAIGHT
pin_chamfer_angle15.0 DEGREES NOMINAL
NSN5315-00-276-5365
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 482530 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
UNDER HEAD LENGTH: 0.786 INCHES MINIMUM AND 0.806 INCHES MAXIMUM IN
•
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN: 0.125 INCHES NOMINAL IN
•
PIN CHAMFER ANGLE: 15.0 DEGREES NOMINAL
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
FIRST HOLE DIAMETER: 0.0681 INCHES MINIMUM AND 0.0881 INCHES MAXIMUM IN
•
CHAMFER LENGTH: 0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN
•
HEIGHT: 0.083 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
•
DIAMETER: 0.243 INCHES MINIMUM AND 0.248 INCHES MAXIMUM IN
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
UNDER HEAD LENGTH0.786 INCHES MINIMUM AND 0.806 INCHES MAXIMUM IN
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN0.125 INCHES NOMINAL IN
PIN CHAMFER ANGLE15.0 DEGREES NOMINAL
HOLE ARRANGEMENT STYLEONE END DRILLED
FIRST HOLE DIAMETER0.0681 INCHES MINIMUM AND 0.0881 INCHES MAXIMUM IN
CHAMFER LENGTH0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN
HEIGHT0.083 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
DIAMETER0.243 INCHES MINIMUM AND 0.248 INCHES MAXIMUM IN
HEAD STYLEFLAT
PIN HEAD DIAMETER0.375 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
821017Interchangeable
interchangeable cross-reference
interchangeable
80110Interchangeable
interchangeable cross-reference
interchangeable
482530Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 482530?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 482530?
482530 is a CAPACITOR,VARIABLE,AIR DIELECTRI. It is classified as a MRO (MRO_GENERAL).
What parts can replace 482530?
There are 3 known substitutes for 482530: 821017, 80110, 482530. Substitute compatibility should be verified for your specific system.
What is the NSN for 482530?
482530 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-276-5365. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 482530

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026