PartsTable
Technical Data Sheet
PartsTable / MRO / 80110
80110 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
SAS cables have specific lane counts: 4i (internal) or 4e (external) Cable length matters — too short won't reach, too long creates clutter
Verify connector type on BOTH ends — many SAS cables are asymmetric
PRODUCT OVERVIEW

CAPACITOR,VARIABLE,AIR DIELECTRI. Key specifications include material: RUBBER SYNTHETIC TUBE, temp_rating: -40.0 FAHRENHEIT AND 212.0 FAHRENHEIT SINGLE RESPONSE DEGF, exterior_color: GRAY/GREY, vacuum_in_torr: 381.0, inside_diameter: 0.625 INCHES NOMINAL IN, outside_diameter: 0.906 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-00-410-6540, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 80110
NSN: 5999-00-410-6540
FSC: 5999
CAGE: 07700 — TECHNICAL WIRE PRODUCTS, LLC DBA TWP (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC TUBE
temp_rating-40.0 FAHRENHEIT AND 212.0 FAHRENHEIT SINGLE RESPONSE DEGF
exterior_colorGRAY/GREY
vacuum_in_torr381.0
inside_diameter0.625 INCHES NOMINAL IN
outside_diameter0.906 INCHES NOMINAL IN
operating_pressure200.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
burst_test_pressure800.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
end_item_identificationTRAK INTERNATIONAL,SKYTRAK,MODEL 6000M,NSN 3930-01-158-0849
inside_surface_conditionSMOOTH
media_for_which_designedFUEL/OIL, HYDROCARBON SINGLE RESPONSE
hydrostatic_test_pressure400.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
NSN5999-00-410-6540
COMPONENT DIAGRAM
CONN A SFF-8482 CONN B SFF-8087 LENGTH: SAS CABLE ASSEMBLY | SFF-8482 to SFF-8087 Cable length: | SAS | Shielded TITLE CABLE ASSY PN 80110 MFR CAPACITOR,VARIABLE,AIR DIELECTRI
KEY FEATURES
•
APERTURE DIAMETER: 0.651 INCHES MINIMUM AND 0.681 INCHES MAXIMUM IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 0.140 INCHES NOMINAL IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH: 0.140 INCHES NOMINAL IN
•
MATERIAL: UNABLE TO DECODE
•
OUTSIDE CORNER RADIUS: 0.150 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.105 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 0.704 INCHES MINIMUM AND 0.734 INCHES MAXIMUM IN
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
APERTURE DIAMETER0.651 INCHES MINIMUM AND 0.681 INCHES MAXIMUM IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.140 INCHES NOMINAL IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.140 INCHES NOMINAL IN
MATERIALUNABLE TO DECODE
OVERALL WIDTH0.985 INCHES MINIMUM AND 1.015 INCHES MAXIMUM IN
OUTSIDE CORNER RADIUS0.150 INCHES NOMINAL IN
HOLE DIAMETER0.105 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH0.704 INCHES MINIMUM AND 0.734 INCHES MAXIMUM IN
MATERIALUNABLE TO DECODE
OVERALL LENGTH0.985 INCHES MINIMUM AND 1.015 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
17250Interchangeable
interchangeable cross-reference
interchangeable
235A23Interchangeable
interchangeable cross-reference
interchangeable
80110Interchangeable
interchangeable cross-reference
interchangeable
11-845Interchangeable
interchangeable cross-reference
interchangeable
21Interchangeable
interchangeable cross-reference
interchangeable
760322-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy 80110?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 80110?
80110 is a CAPACITOR,VARIABLE,AIR DIELECTRI. It is classified as a MRO (MRO_GENERAL).
What parts can replace 80110?
There are 18 known substitutes for 80110: 17250, 235A23, 80110 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 80110?
80110 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-00-410-6540. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 80110

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026