PartsTable / COMPONENT / 475516
475516
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
PLUG,PROTECTIVE,DUST AND MOISTUR. Key specifications include material: STEEL, design_type: FRICTION, overall_diameter: 0.340 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN, opening_inside_diameter_for_which_designed: 0.287 INCHES MINIMUM AND 0.297 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-700-1423, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
475516
NSN: 5340-00-700-1423 FSC: 5340 CAGE: 11862 — GENERAL MOTORS CORP CHEVROLET MOTOR DIV SPECIAL PRODUCTS DEPT (USA)
SPECIFICATIONS
material STEEL design_type FRICTION overall_diameter 0.340 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN end_item_identification W/S:AIRCRAFT, T-39; 485L TACS; VEHICLE, COMMERCIAL UTILITY CARGO (CUCV); COMMUNICATIONS PROGRAM, COMBAT THEATER (TRI-TAC) 478I opening_inside_diameter_for_which_designed 0.287 INCHES MINIMUM AND 0.297 INCHES MAXIMUM IN NSN 5340-00-700-1423
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 475516
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• OPENING INSIDE DIAMETER FOR WHICH DESIGNED: 0.287 INCHES MINIMUM AND 0.297 INCHES MAXIMUM IN
• OVERALL DIAMETER: 0.340 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
OPENING INSIDE DIAMETER FOR WHICH DESIGNED 0.287 INCHES MINIMUM AND 0.297 INCHES MAXIMUM IN MATERIAL STEEL END ITEM IDENTIFICATION W/S:AIRCRAFT, T-39; 485L TACS; VEHICLE, COMMERCIAL UTILITY CARGO (CUCV); COMMUNICATIONS PROGRAM, COMBAT THEATER (TRI-TAC) 478I OVERALL DIAMETER 0.340 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN DESIGN TYPE FRICTION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
11611 Interchangeable interchangeable cross-reference
interchangeable
00911611 Interchangeable interchangeable cross-reference
interchangeable
9-11611 Interchangeable interchangeable cross-reference
interchangeable
260-0325-00 Interchangeable interchangeable cross-reference
interchangeable
TYPEF Interchangeable interchangeable cross-reference
interchangeable
SM-B-148637 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 475516?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 475516?
475516 is a PLUG,PROTECTIVE,DUST AND MOISTUR.
What parts can replace 475516?
There are 26 known substitutes for 475516: 11611, 00911611, 9-11611 and 23 more. Substitute compatibility should be verified for your specific system.
Is 475516 still available?
475516 is currently cancelled.