The Hose Assembly,nonmetallic, cataloged under National Stock Number 4720-00-773-8978, is classified within Federal Supply Class 4720 (Hose and Flexible Tubing) of the Pipe, Tubing, Hose, and Fittings group. The manufacturer of record is U S Army Tank Automotive Command Amsta-Im-Mm. Government technical data includes 30 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 4720-00-773-8978 |
| Primary Part Number | 10933027-6 |
| Item Name | Hose Assembly,nonmetallic |
| FSC / FSG | 4720 / 47 — Hose and Flexible Tubing |
| Manufacturer | U S Army Tank Automotive Command Amsta-Im-Mm |
| Status | ACTIVE |
| Flow Angle | 90.0 DEGREES SECOND END |
| Measuring Method and Length | 32.000 INCHES NOMINAL WORKING IN |
| Temp Rating | -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| Minimum Inside Bending Radius | 5.000 INCHES IN |
| Connection Style | SWIVEL NUT FLARE SECOND END |
| Connection Style | SWIVEL NUT FLARE FIRST END |
| End Connection Design | ELBOW SECOND END |
| End Connection Design | STRAIGHT FIRST END |
| Layer Composition and Location | 1ST LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, CHLOROPRENE |
| Connection Type | THREADED INTERNAL TUBE SECOND END |
| Connection Type | THREADED INTERNAL TUBE FIRST END |
| Cross-Sectional Shape Style | ROUND |
| Outside Diameter | 0.750 INCHES MINIMUM AND 0.812 INCHES MAXIMUM IN |
| Operating Pressure | 2250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| Features Provided | ELECTROSTATIC DISCHARGE CAPABILITY |
| Thread Direction | RIGHT-HAND SECOND END |
| Thread Direction | RIGHT-HAND FIRST END |
| Nominal Thread Size | 0.562 INCHES SECOND END IN |
| Nominal Thread Size | 0.562 INCHES FIRST END IN |
| Seat Angle | 37.0 DEGREES FIRST END |
| Seat Angle | 37.0 DEGREES SECOND END |
| Inside Diameter | 0.375 INCHES NOMINAL IN |
| Inside Surface Condition | SMOOTH |
| Media for Which Designed | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| Hydrostatic Test Pressure | 4500.0 POUNDS PER SQUARE INCH LBS |
| Thread Class | 2B FIRST END |
| Thread Class | 2B SECOND END |
| Burst Test Pressure | 9000.0 POUNDS PER SQUARE INCH LBS |
| Outer Covering Environmental Protection | ABRASION RESISTANT AND MILDEW RESISTANT AND OIL RESISTANT AND OZONE RESISTANT AND WEATHERPROOF |
| Thread Series Designator | UNF FIRST END |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 10933027-6 PRIMARY | U S Army Tank Automotive Command Amsta-Im-Mm (USA) |
| FG1937GGG0320 PRIMARY | Danfoss Power Solutions II, Llc (USA) |
| Reference | Meaning |
|---|---|
| 10933027 | D/9 Drawing number reference only U S Army Tank Automotive Command Amsta-Im-Mm |
| 4730007738978 | 5/9 Secondary reference E.c.a Etablissement Centrald'approvisionnement Des Forces Armee |
NSN 4720-00-773-8978 is a Hose Assembly,nonmetallic, manufactured by U S Army Tank Automotive Command Amsta-Im-Mm, classified under FSC 4720, Hose and Flexible Tubing. Status: active.
NSN 4720-00-773-8978 has 2 manufacturer part numbers on file: 10933027-6 (U S Army Tank Automotive Command Amsta-Im-Mm), FG1937GGG0320 (Danfoss Power Solutions II, Llc).
1 possible match (shared part number, not a government interchangeability claim): 4720-00-777-7298. Verify interchangeability with system specifications before substitution.
Key specifications for 10933027-6: Flow Angle: 90.0 DEGREES SECOND END; Measuring Method and Length: 32.000 INCHES NOMINAL WORKING IN; Temp Rating: -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF; Minimum Inside Bending Radius: 5.000 INCHES IN. 30 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.