PartsTable TECHNICAL DATA SHEET
NSN 4730-00-627-1366Government record, cited

Bolt, Fluid Passage4730-00-627-1366

NSN 4730-00-627-1366 · NIIN 006271366 · Part number MS21939-8H8
Sae International Dba Sae International · FSC 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings · FSG 47 — Pipe, Tubing, Hose, and Fittings · CAGE 0U583
Government record, cited
NSN 4730-00-627-1366 — this item is cataloged by the U.S. Government under National Stock Number 4730-00-627-1366. Manufacturer of record part number: MS21939-8H8.
Also searched as  4730-00-627-1366 · 4730006271366 · NIIN 006271366 · 00-627-1366 · FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings · CAGE 0U583 · MS21939-8H8 · SAE-AS18280 · MS21908-8
Nearby stock numbers  ·
Features
  • Bolt,fluid Passage — FSC 4730
  • First End Thread Series Designator: UNIFIED NATIONAL JOINT FINE (UNJF)
  • Width Across Flats: 0.996 INCHES MINIMUM AND 1.003 INCHES MAXIMUM IN
  • First End Thread Direction: RIGHT-HAND
  • Second End Thread Quantity Per Inch: 16
  • Second End Nominal Thread Size: 0.750 INCHES IN
  • Length From Bearing Surface of Wrenching Feature to End of First Diameter: 0.377 INCHES NOMINAL IN
  • Second End Thread Class: 3A A
Identification
  • NSN: 4730-00-627-1366
  • NIIN: 006271366
  • FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
  • FSG: 47 — Pipe, Tubing, Hose, and Fittings
  • Primary part number: MS21939-8H8
  • Manufacturer: Sae International Dba Sae International
General Description

The Bolt,fluid Passage, cataloged under National Stock Number 4730-00-627-1366, is classified within Federal Supply Class 4730 (Hose, Pipe, Tube, Lubrication, and Railing Fittings) of the Pipe, Tubing, Hose, and Fittings group. The manufacturer of record is Sae International Dba Sae International. Government technical data includes 29 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN4730-00-627-1366
Primary Part NumberMS21939-8H8
Item NameBolt,fluid Passage
FSC / FSG4730 / 47 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
ManufacturerSae International Dba Sae International
StatusACTIVE
First End Thread Series DesignatorUNIFIED NATIONAL JOINT FINE (UNJF)
Width Across Flats0.996 INCHES MINIMUM AND 1.003 INCHES MAXIMUM IN
First End Thread DirectionRIGHT-HAND
Second End Thread Quantity Per Inch16
Second End Nominal Thread Size0.750 INCHES IN
Length From Bearing Surface of Wrenching Feature to End of First Diameter0.377 INCHES NOMINAL IN
Second End Thread Class3A A
Third Diameter From Wrenching Feature0.811 INCHES NOMINAL IN
Body StyleBODY WRENCHING
First End Thread Class3A A
First End Thread Quantity Per Inch16
First End Style DesignatorFLARELESS
Length From Bearing Surface of Wrenching Feature to End of Third Diameter1.209 INCHES NOMINAL IN
Second Diameter From Wrenching Feature0.740 INCHES NOMINAL IN
Second End Seat Angle12.0 DEGREES NOMINAL
Wrenching Feature Height0.437 INCHES NOMINAL IN
Second End Thread Series DesignatorUNIFIED NATIONAL JOINT FINE (UNJF)
First End Thread Length1.051 INCHES MINIMUM AND 1.096 INCHES MAXIMUM IN
Wrenching Feature StyleHEXAGON
Material Document and ClassificationQQ-A-268,T4 FED SPEC SINGLE MATERIAL RESPONSE
Second End Thread DirectionRIGHT-HAND
Length From Bearing Surface of Wrenching Feature to End of Second Diameter0.826 INCHES NOMINAL IN
First End Seat Angle12.0 DEGREES NOMINAL
Second End Style DesignatorFLARELESS
Length From Bearing Surface of Wrenching Feature to Bolt End2.460 INCHES NOMINAL IN
First End Connection TypeTHREADED EXTERNAL TUBE
Concentric Hole Diameter0.422 INCHES NOMINAL IN
Surface TreatmentANODIZE
First Radial Fluid Hole Diameter0.300 INCHES NOMINAL IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
MS21939-8H8 PRIMARY Sae International Dba Sae International (USA)
Reference documents
ReferenceMeaning
SAE-AS18280 3/1 Design control — primary reference
Sae International Dba Sae International
MS21908-8 C/1 Advisory reference — outside the item-of-supply concept
U.S. Government activity
MS21939-8H8 5/9 Secondary reference
U.S. Government activity

Frequently Asked Questions

What is NSN 4730-00-627-1366?

NSN 4730-00-627-1366 is a Bolt,fluid Passage, manufactured by Sae International Dba Sae International, classified under FSC 4730, Hose, Pipe, Tube, Lubrication, and Railing Fittings. Status: active.

What part numbers are listed for NSN 4730-00-627-1366?

NSN 4730-00-627-1366 has 1 manufacturer part number on file: MS21939-8H8 (Sae International Dba Sae International).

What are the specifications of MS21939-8H8?

Key specifications for MS21939-8H8: First End Thread Series Designator: UNIFIED NATIONAL JOINT FINE (UNJF); Width Across Flats: 0.996 INCHES MINIMUM AND 1.003 INCHES MAXIMUM IN; First End Thread Direction: RIGHT-HAND; Second End Thread Quantity Per Inch: 16. 29 specifications are documented in the U.S. Government catalog.

Is NSN 4730-00-627-1366 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com