PartsTable TECHNICAL DATA SHEET
NSN 4730-00-089-9888Government record, cited

Bolt, Fluid Passage4730-00-089-9888

NSN 4730-00-089-9888 · NIIN 000899888 · Part number 15-001-204-3
Nammo Defense Systems Inc. Dba Nammo Defense Systems Inc · FSC 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings · FSG 47 — Pipe, Tubing, Hose, and Fittings · CAGE 12116
Government record, cited
NSN 4730-00-089-9888 — this item is cataloged by the U.S. Government under National Stock Number 4730-00-089-9888. Manufacturer of record part number: 15-001-204-3.
Also searched as  4730-00-089-9888 · 4730000899888 · NIIN 000899888 · 00-089-9888 · FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings · CAGE 12116 · 15-001-204-3 · 15-001-204
Nearby stock numbers  ·
Features
  • Bolt,fluid Passage — FSC 4730
  • First End Thread Series Designator: UNF
  • Width Across Flats: 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
  • First End Thread Direction: RIGHT-HAND
  • Length From Bearing Surface of Wrenching Feature to End of First Diameter: 0.150 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: MIL-P-16232,TYPE M,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE
  • First End Thread Class: 3A A
  • Cotter Pin Hole Diameter: 0.061 INCHES MINIMUM AND 0.066 INCHES MAXIMUM IN
Identification
  • NSN: 4730-00-089-9888
  • NIIN: 000899888
  • FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
  • FSG: 47 — Pipe, Tubing, Hose, and Fittings
  • Primary part number: 15-001-204-3
  • Manufacturer: Nammo Defense Systems Inc. Dba Nammo Defense Systems Inc
General Description

The Bolt,fluid Passage, cataloged under National Stock Number 4730-00-089-9888, is classified within Federal Supply Class 4730 (Hose, Pipe, Tube, Lubrication, and Railing Fittings) of the Pipe, Tubing, Hose, and Fittings group. The manufacturer of record is Nammo Defense Systems Inc. Dba Nammo Defense Systems Inc. Government technical data includes 27 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN4730-00-089-9888
Primary Part Number15-001-204-3
Item NameBolt,fluid Passage
FSC / FSG4730 / 47 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
ManufacturerNammo Defense Systems Inc. Dba Nammo Defense Systems Inc
StatusACTIVE
First End Thread Series DesignatorUNF
Width Across Flats0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
First End Thread DirectionRIGHT-HAND
Length From Bearing Surface of Wrenching Feature to End of First Diameter0.150 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationMIL-P-16232,TYPE M,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE
First End Thread Class3A A
Cotter Pin Hole Diameter0.061 INCHES MINIMUM AND 0.066 INCHES MAXIMUM IN
First End Thread Quantity Per Inch16
Concentric Hole Depth0.670 INCHES MINIMUM AND 0.690 INCHES MAXIMUM IN
Second End Seat Angle60.0 DEGREES NOMINAL
Wrenching Feature Height0.175 INCHES MINIMUM AND 0.195 INCHES MAXIMUM IN
Hardness Rating38.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM
First End Thread Length0.195 INCHES MINIMUM AND 0.240 INCHES MAXIMUM IN
Wrenching Feature StyleHEXAGON
Material Document and ClassificationMIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE
Second End Style DesignatorFLARED
Length From Bearing Surface of Wrenching Feature to Bolt End0.820 INCHES MINIMUM AND 0.840 INCHES MAXIMUM IN
Concentric Hole Diameter0.212 INCHES MINIMUM AND 0.218 INCHES MAXIMUM IN
Distance From Bolt End to Hole Center0.075 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN
Surface TreatmentPHOSPHATE
First Radial Fluid Hole Diameter0.155 INCHES MINIMUM AND 0.161 INCHES MAXIMUM IN
Distance From First Radial Hole Center to End of Bolt0.570 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN
MaterialSTEEL COMP 4340
Second Radial Fluid Hole Diameter0.155 INCHES MINIMUM AND 0.161 INCHES MAXIMUM IN
Distance From Second Radial Hole Center to End of Bolt0.570 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN
First Diameter From Wrenching Feature0.758 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
First End Nominal Thread Size0.750 INCHES IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
15-001-204-3 PRIMARY Nammo Defense Systems Inc. Dba Nammo Defense Systems Inc (USA)
Reference documents
ReferenceMeaning
15-001-204 5/9 Secondary reference
Nammo Defense Systems Inc. Dba Nammo Defense Systems Inc
No interchangeability data on file.
Other items in FSC 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
4730-00-000-1895
4730-00-000-1895 · Item name not on file
4730-00-000-4289
4730-00-000-4289 · Item name not on file
4730-00-000-4445
4730-00-000-4445 · Item name not on file
4730-00-000-8373
4730-00-000-8373 · Item name not on file
4730-00-000-8897
4730-00-000-8897 · Item name not on file
4730-00-001-0007
4730-00-001-0007 · Item name not on file
4730-00-001-0008
COUPLING,TUBE
4730-00-001-0008
COUPLING,TUBE

Frequently Asked Questions

What is NSN 4730-00-089-9888?

NSN 4730-00-089-9888 is a Bolt,fluid Passage, manufactured by Nammo Defense Systems Inc. Dba Nammo Defense Systems Inc, classified under FSC 4730, Hose, Pipe, Tube, Lubrication, and Railing Fittings. Status: active.

What part numbers are listed for NSN 4730-00-089-9888?

NSN 4730-00-089-9888 has 1 manufacturer part number on file: 15-001-204-3 (Nammo Defense Systems Inc. Dba Nammo Defense Systems Inc).

What are the specifications of 15-001-204-3?

Key specifications for 15-001-204-3: First End Thread Series Designator: UNF; Width Across Flats: 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN; First End Thread Direction: RIGHT-HAND; Length From Bearing Surface of Wrenching Feature to End of First Diameter: 0.150 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN. 27 specifications are documented in the U.S. Government catalog.

Is NSN 4730-00-089-9888 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com