The Hose Assembly,nonmetallic, cataloged under National Stock Number 4720-01-590-3044, is classified within Federal Supply Class 4720 (Hose and Flexible Tubing) of the Pipe, Tubing, Hose, and Fittings group. Government technical data includes 20 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 4720-01-590-3044 |
| Item Name | Hose Assembly,nonmetallic |
| FSC / FSG | 4720 / 47 — Hose and Flexible Tubing |
| Status | ACTIVE |
| Flow Angle | 90.0 DEGREES ALL ENDS |
| Measuring Method and Length | 25.125 INCHES NOMINAL WORKING IN |
| Temp Rating | -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| Fitting Component and Surface Treatment | BODY ANODIZE ALL ENDS |
| Connection Style | SWIVEL NUT FLARE ALL ENDS |
| End Connection Design | ELBOW ALL ENDS |
| Layer Composition and Location | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE AND 1ST LAYER MOLDED RUBBER, SYNTHETIC AND 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| Angle Between Rigid Elbow Fittings in Deg | 51.0 |
| Connection Type | THREADED INTERNAL TUBE ALL ENDS |
| Cross-Sectional Shape Style | ROUND |
| Outside Diameter | 0.375 INCHES NOMINAL IN |
| Operating Pressure | 1000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| End Fitting Component and Material | BODY ALUMINUM ALLOY 6061 ALL ENDS |
| Thread Direction | RIGHT-HAND ALL ENDS |
| Inside Diameter | 0.329 INCHES MINIMUM AND 0.355 INCHES MAXIMUM IN |
| Inside Surface Condition | SMOOTH |
| Thread Class | 3B ALL ENDS |
| Burst Test Pressure | 6000.0 POUNDS PER SQUARE INCH LBS |
| Thread Quantity Per Inch | 18 ALL ENDS |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) ALL ENDS |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| M83796/1G251L03 | 2/2 Government specification standardization U.S. Government activity |
| MIL-DTL-83796/1 | 4/1 Identification reference U.S. Government activity |
NSN 4720-01-590-3044 is a Hose Assembly,nonmetallic, classified under FSC 4720, Hose and Flexible Tubing. Status: active.
Key specifications for 4720-01-590-3044: Flow Angle: 90.0 DEGREES ALL ENDS; Measuring Method and Length: 25.125 INCHES NOMINAL WORKING IN; Temp Rating: -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF; Fitting Component and Surface Treatment: BODY ANODIZE ALL ENDS. 20 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.