The Hose Assembly,nonmetallic, cataloged under National Stock Number 4720-01-568-4765, is classified within Federal Supply Class 4720 (Hose and Flexible Tubing) of the Pipe, Tubing, Hose, and Fittings group. The manufacturer of record is Naval Sea Systems Command. Government technical data includes 1 specification, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 4720-01-568-4765 |
| Primary Part Number | 7592306-131 |
| Item Name | Hose Assembly,nonmetallic |
| FSC / FSG | 4720 / 47 — Hose and Flexible Tubing |
| Manufacturer | Naval Sea Systems Command |
| Status | ACTIVE |
| Special Markings | EACH HOSE TO BE MARKED WITH (2) TIE WRAPS AND (1) METAL TAG. ELECTRO-CHEMICAL ETCH FIND NO. 3, METAL TAG, USING A MARKING LISTED IN TABLE A IN ACCORDANCE WITH MIL-STD-130. LOCATE MARKING APPROXIMATELY AT MIDPOINT OF HOSE USING TIE WRAPS, TRIM EXCESS TIE WRAP |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL B — Remove Demilitarization Key Points |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 7592306-131 PRIMARY | Naval Sea Systems Command (USA) |
NSN 4720-01-568-4765 is a Hose Assembly,nonmetallic, manufactured by Naval Sea Systems Command, classified under FSC 4720, Hose and Flexible Tubing. Status: active.
NSN 4720-01-568-4765 has 1 manufacturer part number on file: 7592306-131 (Naval Sea Systems Command).
Key specifications for 7592306-131: Special Features: PROP SEC HYD. ALL TUBE AND HOSE ASSEMBLIES SHALL BE CLEANED AS FOLLOWS; IMMERSE AND FLUSH EACH TUBE OR HOSE WITH SAFTEY-KLEEN PREMIUM SOLVENT, OR EQUIVILANT (CAGE 0S0J2, P/N 6605). BLOW DRY NITROGEN, REPEAT IMERSE, FLUSH AND DRY PROCESS. REMOVE REMAINING PARTICLES FROM TUBE OR HOSE ASSEMBLY USING A PNEUMATIC CLEANING GUN AND POLYURETHANE FOAM PROJECTILE. (CAGE 52213, P/N JCL-2060, OR EQUIVILANT). FINAL PURGE WITH DRY NITROGEN. OPENINGS SHALL BE CAPPED AIR TIGHT IMMEDIATELY. PLASTIC TAPE IS ALLOWED TO HOLD CAPS, HOWEVER TAPE SHALL NOT BE USED AS A CAP. ASSEMBLY CONSISTS OF; (AR) CAGE 06383, P/N PLTS-C0; (AR) CAGE 06383, P/N MMP350W38-C316, (2) CAGE 1KPD5, P/N 1JC43-12-12C, (1) CAGE 30780, P/N 471ST-12; Part Name Assigned by Controlling Agency: HOSE ASSEMBLY; End Item Identification: 7386195 (53711) PROPULSION SCTN HYD INTERCONNECT; Special Markings: EACH HOSE TO BE MARKED WITH (2) TIE WRAPS AND (1) METAL TAG. ELECTRO-CHEMICAL ETCH FIND NO. 3, METAL TAG, USING A MARKING LISTED IN TABLE A IN ACCORDANCE WITH MIL-STD-130. LOCATE MARKING APPROXIMATELY AT MIDPOINT OF HOSE USING TIE WRAPS, TRIM EXCESS TIE WRAP. 1 specification is documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
NSN 4720-01-568-4765 has DEMIL Code B. Demilitarization may be required before disposal or transfer to non-military entities.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.