The Hose Assembly,nonmetallic, cataloged under National Stock Number 4720-01-496-7030, is classified within Federal Supply Class 4720 (Hose and Flexible Tubing) of the Pipe, Tubing, Hose, and Fittings group. Government technical data includes 22 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 4720-01-496-7030 |
| Item Name | Hose Assembly,nonmetallic |
| FSC / FSG | 4720 / 47 — Hose and Flexible Tubing |
| Status | ACTIVE |
| Flow Angle | 90.00 DEGREES SECOND END |
| Measuring Method and Length | 11.375 INCHES NOMINAL OVERALL IN |
| Temp Rating | -65.0 FAHRENHEIT AND 450.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| Minimum Inside Bending Radius | 4.625 INCHES IN |
| Connection Style | SWIVEL NUT WITH COMPRESSION SLEEVE FIRST END |
| Nominal Inside Diameter Hose Accommodated | 0.500 INCHES SECOND END IN |
| Nominal Inside Diameter Hose Accommodated | 0.500 INCHES FIRST END IN |
| End Connection Design | ELBOW SECOND END |
| End Connection Design | STRAIGHT FIRST END |
| Layer Composition and Location | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| Connection Type | THREADED INTERNAL TUBE FIRST END |
| Cross-Sectional Shape Style | ROUND |
| Outside Diameter | 0.562 INCHES NOMINAL IN |
| Operating Pressure | 1500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| Seat Angle | 37.0 DEGREES FIRST END |
| Inside Diameter | 0.406 INCHES NOMINAL IN |
| Inside Surface Condition | SMOOTH |
| Media for Which Designed | FUEL/OIL, HYDROCARBON AND AIR SINGLE RESPONSE |
| Hydrostatic Test Pressure | 3000.0 POUNDS PER SQUARE INCH LBS |
| Test Data Document | 96906-MS8005 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Burst Test Pressure | 6000.0 POUNDS PER SQUARE INCH LBS |
| Outer Covering Environmental Protection | CORROSION RESISTANT |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS8005 | 5/9 Secondary reference U.S. Government activity |
| MIL-DTL-25579 | 4/1 Identification reference U.S. Government activity |
| MS8005H113C | 2/2 Government specification standardization U.S. Government activity |
NSN 4720-01-496-7030 is a Hose Assembly,nonmetallic, classified under FSC 4720, Hose and Flexible Tubing. Status: active.
Key specifications for 4720-01-496-7030: Flow Angle: 90.00 DEGREES SECOND END; Measuring Method and Length: 11.375 INCHES NOMINAL OVERALL IN; Temp Rating: -65.0 FAHRENHEIT AND 450.0 FAHRENHEIT SINGLE RESPONSE DEGF; Minimum Inside Bending Radius: 4.625 INCHES IN. 22 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.