The Hose Assembly,nonmetallic, cataloged under National Stock Number 4720-01-470-5767, is classified within Federal Supply Class 4720 (Hose and Flexible Tubing) of the Pipe, Tubing, Hose, and Fittings group. The manufacturer of record is Bae Systems Tactical Vehicle Systems Lp Dba Data Systems International Inc. Government technical data includes 26 specifications, cited from the U.S. Government catalog. The record lists 4 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 4720-01-470-5767 |
| Primary Part Number | 12421912-004 |
| Item Name | Hose Assembly,nonmetallic |
| FSC / FSG | 4720 / 47 — Hose and Flexible Tubing |
| Manufacturer | Bae Systems Tactical Vehicle Systems Lp Dba Data Systems International Inc |
| Status | ACTIVE |
| Measuring Method and Length | 3170.000 MILLIMETERS NOMINAL OVERALL MM |
| Temp Rating | -55.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| Fitting Component and Surface Treatment | COMPLETE FITTING ZINC FIRST END |
| Minimum Inside Bending Radius | 4.500 INCHES IN |
| Connection Style | SWIVEL NUT FLARE FIRST END |
| End Connection Design | STRAIGHT FIRST END |
| Layer Composition and Location | 1ST LAYER MOLDED RUBBER, SYNTHETIC AND 2ND LAYER RUBBER IMPREGNATED BRAIDED FABRIC AND 3RD LAYER BRAIDED STEEL WIRE AND OUTER LAYER RUBBER IMPREGNATED BRAIDED FABRIC |
| Connection Type | THREADED INTERNAL TUBE FIRST END |
| Cross-Sectional Shape Style | ROUND |
| Outside Diameter | 1.456 INCHES MINIMUM AND 1.518 INCHES MAXIMUM IN |
| Operating Pressure | 300.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| End Fitting Component and Material | COMPLETE FITTING STEEL ALL ENDS |
| Thread Direction | RIGHT-HAND FIRST END |
| Nominal Thread Size | 1.625 INCHES FIRST END IN |
| Seat Angle | 37.0 DEGREES FIRST END |
| Specification/standard Data | 81349-MIL-H-13444E GOVERNMENT SPECIFICATION |
| Nondefinitive Spec/std Data | 3 TYPE AND 4 TABLE |
| Inside Diameter | 1.125 INCHES MINIMUM AND 1.172 INCHES MAXIMUM IN |
| Inside Surface Condition | SMOOTH |
| Media for Which Designed | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| Hydrostatic Test Pressure | 625.0 POUNDS PER SQUARE INCH LBS |
| Thread Class | 2B FIRST END |
| Burst Test Pressure | 1250.0 POUNDS PER SQUARE INCH LBS |
| Thread Quantity Per Inch | 12 FIRST END |
| Outer Covering Environmental Protection | OZONE RESISTANT AND OIL RESISTANT AND FUEL RESISTANT AND MILDEW RESISTANT |
| Thread Series Designator | UNF FIRST END |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 12421912-004 | Amz Alabama Inc. (USA) |
| 12421912-004 | Oshkosh Defense Llc (USA) |
| 12421912-004 | U S Army Tank Automotive Command Amsta-Im-Mm (USA) |
| 12421912-004 PRIMARY | Bae Systems Tactical Vehicle Systems Lp Dba Data Systems International Inc (USA) |
| Reference | Meaning |
|---|---|
| 12421912 | D/9 Drawing number reference only U S Army Tank Automotive Command Amsta-Im-Mm |
NSN 4720-01-470-5767 is a Hose Assembly,nonmetallic, manufactured by Bae Systems Tactical Vehicle Systems Lp Dba Data Systems International Inc, classified under FSC 4720, Hose and Flexible Tubing. Status: active.
NSN 4720-01-470-5767 has 4 manufacturer part numbers on file: 12421912-004 (Amz Alabama Inc.), 12421912-004 (Oshkosh Defense Llc), 12421912-004 (U S Army Tank Automotive Command Amsta-Im-Mm), 12421912-004 (Bae Systems Tactical Vehicle Systems Lp Dba Data Systems International Inc).
1 possible match (shared part number, not a government interchangeability claim): 4720-01-564-5300. Verify interchangeability with system specifications before substitution.
Key specifications for 12421912-004: Measuring Method and Length: 3170.000 MILLIMETERS NOMINAL OVERALL MM; Temp Rating: -55.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF; Fitting Component and Surface Treatment: COMPLETE FITTING ZINC FIRST END; Minimum Inside Bending Radius: 4.500 INCHES IN. 26 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.