The Hose Assembly,nonmetallic, cataloged under National Stock Number 4720-01-446-7490, is classified within Federal Supply Class 4720 (No Item Name Available) of the Pipe, Tubing, Hose, and Fittings group. The primary manufacturer of record is Danfoss Power Solutions II, Llc. Government technical data includes 21 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 3 commercial cross-references from 2 manufacturers, enabling identification through both NSN and commercial part number lookups. 11 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 4720-01-446-7490 |
| Primary Part Number | FG1011GGG0600 |
| Item Name | Hose Assembly,nonmetallic |
| FSC / FSG | 4720 / 47 — No Item Name Available |
| Manufacturer | Danfoss Power Solutions II, Llc |
| Status | ACTIVE |
| Layer Composition and Location | 1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| Cross-Sectional Shape Style | ROUND |
| Hydrostatic Test Pressure | 8000.0 POUNDS PER SQUARE INCH LBS |
| End Connection Design | STRAIGHT FIRST END |
| Thread Class | 3B FIRST END |
| Thread Direction | RIGHT-HAND FIRST END |
| Media for Which Designed | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) FIRST END |
| Outer Covering Environmental Protection | COLD RESISTANT AND FUEL RESISTANT AND HYDRAULIC SOLUTION RESISTANT AND OIL RESISTANT AND OZONE RESISTANT AND WEATHERPROOF |
| Measuring Method and Length | 79.000 INCHES NOMINAL OVERALL IN |
| Connection Style | SWIVEL NUT FLARE FIRST END |
| Outside Diameter | 0.750 INCHES NOMINAL IN |
| Inside Diameter | 0.375 INCHES NOMINAL IN |
| Seat Angle | 37.0 DEGREES FIRST END |
| Operating Pressure | 4000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| Burst Test Pressure | 16000.0 POUNDS PER SQUARE INCH LBS |
| Nominal Thread Size | 0.562 INCHES FIRST END IN |
| Connection Type | THREADED INTERNAL TUBE FIRST END |
| Inside Surface Condition | SMOOTH |
| Temp Rating | -40.0 FAHRENHEIT AND 212.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| Minimum Inside Bending Radius | 5.000 INCHES IN |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 13214E2501 | Cecom Lr Center (USA) |
| FG1011GGG0600 PRIMARY | Danfoss Power Solutions II, Llc (USA) |
| 13214E2501-9 PRIMARY | Cecom Lr Center (USA) |
NSN 4720-01-446-7490 is a Hose Assembly,nonmetallic, manufactured by Danfoss Power Solutions II, Llc, classified under FSC 4720 (No Item Name Available). Status: active.
NSN 4720-01-446-7490 has 3 cross-referenced part numbers: 13214E2501 (Cecom Lr Center), FG1011GGG0600 (Danfoss Power Solutions II, Llc), 13214E2501-9 (Cecom Lr Center).
There are 11 known substitutes for 4720-01-446-7490: 4720-01-195-3841, 4720-01-195-3842, 4720-01-195-3843 and 8 more. Verify interchangeability with system specifications before substitution.
Key specifications for FG1011GGG0600: Layer Composition and Location: 1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC; Cross-Sectional Shape Style: ROUND; Hydrostatic Test Pressure: 8000.0 POUNDS PER SQUARE INCH LBS; End Item Identification: USED ON THE M9 ACE. 22 total characteristics are documented in the Federal Logistics Information System.