The Hose Assembly,nonmetallic, cataloged under National Stock Number 4720-01-446-1897, is classified within Federal Supply Class 4720 (Hose and Flexible Tubing) of the Pipe, Tubing, Hose, and Fittings group. The manufacturer of record is Daimler Truck North America Llc. Government technical data includes 26 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 4720-01-446-1897 |
| Primary Part Number | A23-02244-065 |
| Item Name | Hose Assembly,nonmetallic |
| FSC / FSG | 4720 / 47 — Hose and Flexible Tubing |
| Manufacturer | Daimler Truck North America Llc |
| Status | ACTIVE |
| Measuring Method and Length | 6.625 INCHES NOMINAL OVERALL IN |
| Temp Rating | -40.0 FAHRENHEIT AND 212.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| Fitting Component and Surface Treatment | COMPLETE FITTING ZINC FIRST END |
| Minimum Inside Bending Radius | 4.620 INCHES IN |
| Connection Style | SWIVEL NUT FLARE FIRST END |
| End Connection Design | STRAIGHT FIRST END |
| Vacuum in Torr | 50.8 |
| Layer Composition and Location | 1ST LAYER BRAIDED TEXTILE YARN AND 2ND LAYER BRAIDED STEEL WIRE AND 3RD LAYER BRAIDED TEXTILE YARN AND OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| Connection Type | THREADED INTERNAL TUBE FIRST END |
| Cross-Sectional Shape Style | ROUND |
| Outside Diameter | 0.760 INCHES NOMINAL IN |
| Operating Pressure | 2000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| Features Provided | REUSABLE END FITTINGS |
| End Fitting Component and Material | COMPLETE FITTING STEEL ALL ENDS |
| Thread Direction | RIGHT-HAND FIRST END |
| Nominal Thread Size | 0.750 INCHES FIRST END IN |
| Seat Angle | 37.0 DEGREES FIRST END |
| Specification/standard Data | SAE J517,100R5-81343 NATIONAL STD/SPEC |
| Inside Diameter | 0.410 INCHES NOMINAL IN |
| Inside Surface Condition | SMOOTH |
| Media for Which Designed | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| Hydrostatic Test Pressure | 4000.0 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3B FIRST END |
| Burst Test Pressure | 8000.0 POUNDS PER SQUARE INCH LBS |
| Outer Covering Environmental Protection | FUEL RESISTANT AND HYDRAULIC SOLUTION RESISTANT AND OIL RESISTANT AND OZONE RESISTANT AND WEATHERPROOF |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) FIRST END |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| A23-02244-065 PRIMARY | Daimler Truck North America Llc (USA) |
| Reference | Meaning |
|---|---|
| A23-2242 | D/9 Drawing number reference only Daimler Truck North America Llc |
NSN 4720-01-446-1897 is a Hose Assembly,nonmetallic, manufactured by Daimler Truck North America Llc, classified under FSC 4720, Hose and Flexible Tubing. Status: active.
NSN 4720-01-446-1897 has 1 manufacturer part number on file: A23-02244-065 (Daimler Truck North America Llc).
Key specifications for A23-02244-065: Measuring Method and Length: 6.625 INCHES NOMINAL OVERALL IN; Temp Rating: -40.0 FAHRENHEIT AND 212.0 FAHRENHEIT SINGLE RESPONSE DEGF; Fitting Component and Surface Treatment: COMPLETE FITTING ZINC FIRST END; Minimum Inside Bending Radius: 4.620 INCHES IN. 26 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.