The Hose Assembly,nonmetallic, cataloged under National Stock Number 4720-01-442-6701, is classified within Federal Supply Class 4720 (Hose and Flexible Tubing) of the Pipe, Tubing, Hose, and Fittings group. The manufacturer of record is Bae Systems Tactical Vehicle Systems Lp Dba Data Systems International Inc. Government technical data includes 29 specifications, cited from the U.S. Government catalog. The record lists 3 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 4720-01-442-6701 |
| Primary Part Number | 12418125-002 |
| Item Name | Hose Assembly,nonmetallic |
| FSC / FSG | 4720 / 47 — Hose and Flexible Tubing |
| Manufacturer | Bae Systems Tactical Vehicle Systems Lp Dba Data Systems International Inc |
| Status | ACTIVE |
| Flow Angle | 90.0 DEGREES SECOND END |
| Measuring Method and Length | 6604.0 MILLIMETERS NOMINAL OVERALL MM |
| Temp Rating | -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| Minimum Inside Bending Radius | 8.000 INCHES IN |
| Connection Style | SWIVEL NUT, GASKET SEAL SECOND END |
| Connection Style | SWIVEL NUT FLARE FIRST END |
| End Connection Design | ELBOW SECOND END |
| End Connection Design | STRAIGHT FIRST END |
| Layer Composition and Location | 1ST LAYER BRAIDED WIRE AND 2ND LAYER BRAIDED WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| Connection Type | THREADED INTERNAL TUBE SECOND END |
| Connection Type | THREADED INTERNAL TUBE FIRST END |
| Cross-Sectional Shape Style | ROUND |
| Outside Diameter | 1.090 INCHES NOMINAL IN |
| Operating Pressure | 2750.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| Thread Direction | RIGHT-HAND SECOND END |
| Thread Direction | RIGHT-HAND FIRST END |
| Nominal Thread Size | 1.000 INCHES SECOND END IN |
| Nominal Thread Size | 0.875 INCHES FIRST END IN |
| Seat Angle | 37.0 DEGREES FIRST END |
| Inside Diameter | 0.625 INCHES NOMINAL IN |
| Inside Surface Condition | SMOOTH |
| Media for Which Designed | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| Hydrostatic Test Pressure | 5500.0 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3B SECOND END |
| Thread Class | 3B FIRST END |
| Burst Test Pressure | 11000.0 POUNDS PER SQUARE INCH LBS |
| Thread Quantity Per Inch | 14 SECOND END |
| Outer Covering Environmental Protection | OIL RESISTANT AND MILDEW RESISTANT AND OZONE RESISTANT |
| Thread Series Designator | UNS SECOND END |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 12418125-002 | U S Army Tank Automotive Command Amsta-Im-Mm (USA) |
| 12418125-002 PRIMARY | Bae Systems Tactical Vehicle Systems Lp Dba Data Systems International Inc (USA) |
| 12418125-002 | Amz Alabama Inc. (USA) |
| Reference | Meaning |
|---|---|
| 12418125 | D/9 Drawing number reference only U S Army Tank Automotive Command Amsta-Im-Mm |
NSN 4720-01-442-6701 is a Hose Assembly,nonmetallic, manufactured by Bae Systems Tactical Vehicle Systems Lp Dba Data Systems International Inc, classified under FSC 4720, Hose and Flexible Tubing. Status: active.
NSN 4720-01-442-6701 has 3 manufacturer part numbers on file: 12418125-002 (U S Army Tank Automotive Command Amsta-Im-Mm), 12418125-002 (Bae Systems Tactical Vehicle Systems Lp Dba Data Systems International Inc), 12418125-002 (Amz Alabama Inc.).
1 possible match (shared part number, not a government interchangeability claim): 4720-01-473-5825. Verify interchangeability with system specifications before substitution.
Key specifications for 12418125-002: Flow Angle: 90.0 DEGREES SECOND END; Measuring Method and Length: 6604.0 MILLIMETERS NOMINAL OVERALL MM; Temp Rating: -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF; Minimum Inside Bending Radius: 8.000 INCHES IN. 29 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.