The Hose Assembly,nonmetallic, cataloged under National Stock Number 4720-01-430-0239, is classified within Federal Supply Class 4720 (Hose and Flexible Tubing) of the Pipe, Tubing, Hose, and Fittings group. Government technical data includes 21 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 4720-01-430-0239 |
| Item Name | Hose Assembly,nonmetallic |
| FSC / FSG | 4720 / 47 — Hose and Flexible Tubing |
| Status | ACTIVE |
| Measuring Method and Length | 15.000 INCHES NOMINAL OVERALL IN |
| Temp Rating | -65.0 FAHRENHEIT AND 25.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| Minimum Inside Bending Radius | 2.000 INCHES IN |
| Connection Style | SWIVEL NUT, FLARELESS FIRST END |
| End Connection Design | STRAIGHT FIRST END |
| Layer Composition and Location | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| Connection Type | THREADED INTERNAL TUBE FIRST END |
| Cross-Sectional Shape Style | ROUND |
| Outside Diameter | 0.375 INCHES NOMINAL IN |
| Operating Pressure | 1500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| Thread Direction | RIGHT-HAND FIRST END |
| Nominal Thread Size | 0.500 INCHES FIRST END IN |
| Seat Angle | 37.0 DEGREES FIRST END |
| Inside Diameter | 0.250 INCHES NOMINAL IN |
| Inside Surface Condition | SMOOTH |
| Hydrostatic Test Pressure | 3000.0 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3B FIRST END |
| Test Data Document | 81349-MIL-H-25579 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Burst Test Pressure | 10000.0 POUNDS PER SQUARE INCH LBS |
| Outer Covering Environmental Protection | CORROSION RESISTANT |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) FIRST END |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MIL-DTL-25579 | 4/1 Identification reference U.S. Government activity |
| MIL-H-25579 | 5/9 Secondary reference U.S. Government activity |
| MS8001F150B | 2/2 Government specification standardization U.S. Government activity |
NSN 4720-01-430-0239 is a Hose Assembly,nonmetallic, classified under FSC 4720, Hose and Flexible Tubing. Status: active.
Key specifications for 4720-01-430-0239: Measuring Method and Length: 15.000 INCHES NOMINAL OVERALL IN; Temp Rating: -65.0 FAHRENHEIT AND 25.0 FAHRENHEIT SINGLE RESPONSE DEGF; Minimum Inside Bending Radius: 2.000 INCHES IN; Connection Style: SWIVEL NUT, FLARELESS FIRST END. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.