The Hose Assembly,nonmetallic, cataloged under National Stock Number 4720-01-419-1657, is classified within Federal Supply Class 4720 (Hose and Flexible Tubing) of the Pipe, Tubing, Hose, and Fittings group. The manufacturer of record is Danfoss Power Solutions II, Llc. Government technical data includes 30 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 4720-01-419-1657 |
| Primary Part Number | 12365278-115 |
| Item Name | Hose Assembly,nonmetallic |
| FSC / FSG | 4720 / 47 — Hose and Flexible Tubing |
| Manufacturer | Danfoss Power Solutions II, Llc |
| Status | ACTIVE |
| Flow Angle | 90.0 DEGREES SECOND END |
| Measuring Method and Length | 25.750 INCHES NOMINAL OVERALL IN |
| Temp Rating | -40.0 FAHRENHEIT AND 212.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| Flange Thickness | 0.315 INCHES NOMINAL FIRST END IN |
| Flange Thickness | 0.315 INCHES NOMINAL SECOND END IN |
| Minimum Inside Bending Radius | 16.500 INCHES IN |
| Connection Style | PLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) SECOND END |
| Connection Style | PLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) FIRST END |
| End Connection Design | ELBOW SECOND END |
| End Connection Design | STRAIGHT FIRST END |
| Vacuum in Torr | 50.8 |
| Layer Composition and Location | 1ST LAYER BRAIDED WIRE AND 2ND LAYER BRAIDED WIRE AND OUTER LAYER WRAPPED RUBBER, SYNTHETIC |
| Connection Type | PLAIN FACE FLANGE FIRST END |
| Connection Type | PLAIN FACE FLANGE SECOND END |
| Bolt Hole Diameter | 0.469 INCHES NOMINAL FIRST END IN |
| Bolt Hole Diameter | 0.469 INCHES NOMINAL SECOND END IN |
| Cross-Sectional Shape Style | ROUND |
| Outside Diameter | 1.920 INCHES NOMINAL IN |
| Operating Pressure | 300.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| Flange Length | 3.090 INCHES MINIMUM AND 3.160 INCHES MAXIMUM FIRST END IN |
| Flange Length | 3.090 INCHES MINIMUM AND 3.160 INCHES MAXIMUM SECOND END IN |
| Inside Diameter | 1.250 INCHES NOMINAL IN |
| Inside Surface Condition | SMOOTH |
| Bolt Hole Quantity | 4 SECOND END |
| Bolt Hole Quantity | 4 FIRST END |
| Center to Center Distance Between Bolt Holes Along Length | 2.312 INCHES NOMINAL FIRST END IN |
| Center to Center Distance Between Bolt Holes Along Length | 2.312 INCHES NOMINAL SECOND END IN |
| Center to Center Distance Between Bolt Holes Along Width | 1.188 INCHES NOMINAL FIRST END IN |
| Center to Center Distance Between Bolt Holes Along Width | 1.188 INCHES NOMINAL SECOND END IN |
| Media for Which Designed | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 12365278-115 PRIMARY | Danfoss Power Solutions II, Llc (USA) |
| 12365278-115 | U S Army Tank Automotive Command Amsta-Im-Mm (USA) |
| Reference | Meaning |
|---|---|
| 12365278-115 | 5/1 Secondary reference Bae Systems Land & Armaments L.p. |
| 1C02865PNN0256A | 5/1 Secondary reference Danfoss Power Solutions II, Llc |
| 12365278-115 | 3/2 Design control — primary reference U.S. Government activity |
| 12365278 | 5/9 Secondary reference Bae Systems Land & Armaments L.p. |
NSN 4720-01-419-1657 is a Hose Assembly,nonmetallic, manufactured by Danfoss Power Solutions II, Llc, classified under FSC 4720, Hose and Flexible Tubing. Status: active.
NSN 4720-01-419-1657 has 2 manufacturer part numbers on file: 12365278-115 (Danfoss Power Solutions II, Llc), 12365278-115 (U S Army Tank Automotive Command Amsta-Im-Mm).
Key specifications for 12365278-115: Flow Angle: 90.0 DEGREES SECOND END; Measuring Method and Length: 25.750 INCHES NOMINAL OVERALL IN; Temp Rating: -40.0 FAHRENHEIT AND 212.0 FAHRENHEIT SINGLE RESPONSE DEGF; Flange Thickness: 0.315 INCHES NOMINAL FIRST END IN. 30 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.