The Hose Assembly,nonmetallic, cataloged under National Stock Number 4720-01-413-9583, is classified within Federal Supply Class 4720 (Hose and Flexible Tubing) of the Pipe, Tubing, Hose, and Fittings group. Government technical data includes 30 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 4720-01-413-9583 |
| Item Name | Hose Assembly,nonmetallic |
| FSC / FSG | 4720 / 47 — Hose and Flexible Tubing |
| Status | ACTIVE |
| Flow Angle | 45.0 DEGREES SECOND END |
| Measuring Method and Length | 924.0 MILLIMETERS NOMINAL WORKING MM |
| Temp Rating | -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| Minimum Inside Bending Radius | 7.000 INCHES IN |
| Connection Style | SWIVEL NUT, GASKET SEAL SECOND END |
| Connection Style | SWIVEL NUT, GASKET SEAL FIRST END |
| End Connection Design | ELBOW SECOND END |
| End Connection Design | STRAIGHT FIRST END |
| Layer Composition and Location | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| Connection Type | THREADED INTERNAL TUBE SECOND END |
| Connection Type | THREADED INTERNAL TUBE FIRST END |
| Cross-Sectional Shape Style | ROUND |
| Outside Diameter | 0.908 INCHES MAXIMUM IN |
| Operating Pressure | 3500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| Thread Direction | RIGHT-HAND SECOND END |
| Thread Direction | RIGHT-HAND FIRST END |
| Nominal Thread Size | 0.812 INCHES SECOND END IN |
| Nominal Thread Size | 0.812 INCHES FIRST END IN |
| Exterior Color | BLACK |
| Inside Diameter | 0.485 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN |
| Inside Surface Condition | SMOOTH |
| Media for Which Designed | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| Hydrostatic Test Pressure | 7000.0 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3B SECOND END |
| Thread Class | 3B FIRST END |
| Burst Test Pressure | 14000.0 POUNDS PER SQUARE INCH LBS |
| Thread Quantity Per Inch | 16 SECOND END |
| Thread Quantity Per Inch | 16 FIRST END |
| Outer Covering Environmental Protection | ABRASION RESISTANT AND OIL RESISTANT AND WATERPROOF |
| Thread Series Designator | UN FIRST END |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 2775916 | 3/2 Design control — primary reference U.S. Government activity |
NSN 4720-01-413-9583 is a Hose Assembly,nonmetallic, classified under FSC 4720, Hose and Flexible Tubing. Status: active.
Key specifications for 4720-01-413-9583: Flow Angle: 45.0 DEGREES SECOND END; Measuring Method and Length: 924.0 MILLIMETERS NOMINAL WORKING MM; Temp Rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF; Minimum Inside Bending Radius: 7.000 INCHES IN. 30 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.