The Hose Assembly,nonmetallic, cataloged under National Stock Number 4720-01-382-8700, is classified within Federal Supply Class 4720 (No Item Name Available) of the Pipe, Tubing, Hose, and Fittings group. The primary manufacturer of record is Allied Systems Company Dba Allied Systems Co. Government technical data includes 23 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 5 commercial cross-references from 3 manufacturers, enabling identification through both NSN and commercial part number lookups. 9 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 4720-01-382-8700 |
| Primary Part Number | 234397 |
| Item Name | Hose Assembly,nonmetallic |
| FSC / FSG | 4720 / 47 — No Item Name Available |
| Manufacturer | Allied Systems Company Dba Allied Systems Co |
| Status | ACTIVE |
| Inside Diameter | 1.000 INCHES NOMINAL IN |
| Thread Class | 2B FIRST END |
| Cross-Sectional Shape Style | ROUND |
| Minimum Inside Bending Radius | 12.000 INCHES IN |
| Outer Covering Environmental Protection | OIL RESISTANT AND WEATHERPROOF |
| Thread Series Designator | UN FIRST END |
| Connection Type | THREADED INTERNAL TUBE FIRST END |
| Temp Rating | -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| Media for Which Designed | FUEL/OIL, HYDROCARBON AND WATER AND HYDRAULIC FLUID, WATER BASE AND AIR SINGLE RESPONSE |
| Nominal Thread Size | 1.312 INCHES FIRST END IN |
| Outside Diameter | 1.500 INCHES NOMINAL IN |
| Thread Direction | RIGHT-HAND FIRST END |
| End Fitting Component and Material | COMPLETE FITTING STEEL CORROSION RESISTING ALL ENDS |
| Thread Quantity Per Inch | 12 FIRST END |
| Connection Style | SWIVEL NUT FLARE FIRST END |
| End Connection Design | STRAIGHT FIRST END |
| Inside Surface Condition | SMOOTH |
| Burst Test Pressure | 16000.0 POUNDS PER SQUARE INCH LBS |
| Measuring Method and Length | 70.000 INCHES NOMINAL OVERALL IN |
| Layer Composition and Location | 1ST LAYER SPIRALLY LAID STEEL WIRE AND 2ND LAYER SPIRALLY LAID STEEL WIRE AND 3RD LAYER SPIRALLY LAID STEEL WIRE AND 4TH LAYER SPIRALLY LAID STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| Seat Angle | 37.0 DEGREES FIRST END |
| Operating Pressure | 4000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| Specification/standard Data | SAE, J517, 100R12, SIZE 16-81343 NATIONAL STD/SPEC |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 35957 | Allied Systems Company Dba Allied Systems Co (USA) |
| 234397 PRIMARY | Allied Systems Company Dba Allied Systems Co (USA) |
| F77C0606-16-16-16C-70.00 | Parker-Hannifin Corporation Dba Pneutronics Div Hose Products Division (USA) |
| 46-AA16-16-70IN SS | Allied Systems Company Dba Allied Systems Co (USA) |
| F77C0606-16-16-16C-70.00 | Parker Hannifin Corp Dba Pneutronics Div Stratoflex Products Division (USA) |
NSN 4720-01-382-8700 is a Hose Assembly,nonmetallic, manufactured by Allied Systems Company Dba Allied Systems Co, classified under FSC 4720 (No Item Name Available). Status: active.
NSN 4720-01-382-8700 has 5 cross-referenced part numbers: 35957 (Allied Systems Company Dba Allied Systems Co), 234397 (Allied Systems Company Dba Allied Systems Co), F77C0606-16-16-16C-70.00 (Parker-Hannifin Corporation Dba Pneutronics Div Hose Products Division), 46-AA16-16-70IN SS (Allied Systems Company Dba Allied Systems Co), F77C0606-16-16-16C-70.00 (Parker Hannifin Corp Dba Pneutronics Div Stratoflex Products Division).
There are 9 known substitutes for 4720-01-382-8700: 5120-00-370-4027, 5330-00-788-3620, 5930-01-286-5703 and 6 more. Verify interchangeability with system specifications before substitution.
Key specifications for 234397: Inside Diameter: 1.000 INCHES NOMINAL IN; Thread Class: 2B FIRST END; Cross-Sectional Shape Style: ROUND; Minimum Inside Bending Radius: 12.000 INCHES IN. 24 total characteristics are documented in the Federal Logistics Information System.