The Hose Assembly,nonmetallic, cataloged under National Stock Number 4720-01-369-9074, is classified within Federal Supply Class 4720 (Hose and Flexible Tubing) of the Pipe, Tubing, Hose, and Fittings group. The manufacturer of record is Ppm Cranes Inc. Government technical data includes 26 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 2 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 4720-01-369-9074 |
| Primary Part Number | 44Q643D71 |
| Item Name | Hose Assembly,nonmetallic |
| FSC / FSG | 4720 / 47 — Hose and Flexible Tubing |
| Manufacturer | Ppm Cranes Inc |
| Status | ACTIVE |
| Flow Angle | 90.0 DEGREES SECOND END |
| Measuring Method and Length | 44.000 INCHES NOMINAL OVERALL IN |
| Temp Rating | -40.0 CELSIUS AND 90.0 CELSIUS SINGLE RESPONSE DEGC |
| Minimum Inside Bending Radius | 7.000 INCHES IN |
| Connection Style | SWIVEL NUT FLARE SECOND END |
| Connection Style | SWIVEL NUT FLARE FIRST END |
| End Connection Design | ELBOW SECOND END |
| End Connection Design | STRAIGHT FIRST END |
| Layer Composition and Location | 1ST LAYER BRAIDED WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| Connection Type | THREADED INTERNAL TUBE SECOND END |
| Connection Type | THREADED INTERNAL TUBE FIRST END |
| Cross-Sectional Shape Style | ROUND |
| Outside Diameter | 0.970 INCHES NOMINAL IN |
| Operating Pressure | 4000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| Thread Direction | RIGHT-HAND SECOND END |
| Thread Direction | RIGHT-HAND FIRST END |
| Nominal Thread Size | 0.500 INCHES SECOND END IN |
| Nominal Thread Size | 0.500 INCHES FIRST END IN |
| Seat Angle | 37.0 DEGREES FIRST END |
| Seat Angle | 37.0 DEGREES SECOND END |
| Inside Diameter | 0.500 INCHES NOMINAL IN |
| Inside Surface Condition | SMOOTH |
| Media for Which Designed | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| Burst Test Pressure | 16000.0 POUNDS PER SQUARE INCH LBS |
| Thread Series Designator | JIC FIRST END |
| Thread Series Designator | JIC SECOND END |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 44Q643D71 PRIMARY | Ppm Cranes Inc (USA) |
| 1C00967HHH0440AAB | Danfoss Power Solutions II, Llc (USA) |
| Reference | Meaning |
|---|---|
| 44Q643D0 | D/9 Drawing number reference only Morris Material Handling, Inc. |
| FL1709HHH0440 | 5/9 Secondary reference Danfoss Power Solutions II, Llc |
NSN 4720-01-369-9074 is a Hose Assembly,nonmetallic, manufactured by Ppm Cranes Inc, classified under FSC 4720, Hose and Flexible Tubing. Status: active.
NSN 4720-01-369-9074 has 2 manufacturer part numbers on file: 44Q643D71 (Ppm Cranes Inc), 1C00967HHH0440AAB (Danfoss Power Solutions II, Llc).
2 possible matches (shared part number, not a government interchangeability claim): 4720-01-370-6443, 4720-01-370-6444. Verify interchangeability with system specifications before substitution.
Key specifications for 44Q643D71: Flow Angle: 90.0 DEGREES SECOND END; Measuring Method and Length: 44.000 INCHES NOMINAL OVERALL IN; Temp Rating: -40.0 CELSIUS AND 90.0 CELSIUS SINGLE RESPONSE DEGC; Minimum Inside Bending Radius: 7.000 INCHES IN. 26 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.