The Hose Assembly,nonmetallic, cataloged under National Stock Number 4720-01-357-5668, is classified within Federal Supply Class 4720 (No Item Name Available) of the Pipe, Tubing, Hose, and Fittings group. The primary manufacturer of record is Landoll Corporation Dba Landoll Corporation Drexel Division Div Drexel. Government technical data includes 22 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 3 commercial cross-references from 1 manufacturer, enabling identification through both NSN and commercial part number lookups. 7 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 4720-01-357-5668 |
| Primary Part Number | 51039-07 |
| Item Name | Hose Assembly,nonmetallic |
| FSC / FSG | 4720 / 47 — No Item Name Available |
| Manufacturer | Landoll Corporation Dba Landoll Corporation Drexel Division Div Drexel |
| Status | ACTIVE |
| Seat Angle | 37.0 DEGREES FIRST END |
| Thread Direction | RIGHT-HAND FIRST END |
| Temp Rating | -40.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| Inside Diameter | 0.500 INCHES NOMINAL IN |
| Minimum Inside Bending Radius | 5.000 INCHES IN |
| End Connection Design | STRAIGHT FIRST END |
| Operating Pressure | 3500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| Media for Which Designed | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| Measuring Method and Length | 31.125 INCHES NOMINAL OVERALL IN |
| Thread Series Designator | UNF FIRST END |
| Nominal Thread Size | 0.750 INCHES FIRST END IN |
| Outside Diameter | 0.790 INCHES NOMINAL IN |
| Thread Class | 2B FIRST END |
| Connection Type | THREADED INTERNAL TUBE FIRST END |
| First End Distance Between Lugs | 28.000 INCHES NOMINAL IN |
| Exterior Color | BLACK |
| Layer Composition and Location | 1ST LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| Inside Surface Condition | SMOOTH |
| Connection Style | SWIVEL NUT FLARE FIRST END |
| Outer Covering Environmental Protection | ABRASION RESISTANT |
| Cross-Sectional Shape Style | ROUND |
| Burst Test Pressure | 14000.0 POUNDS PER SQUARE INCH LBS |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 51039-07 | Landoll Corporation Dba Landoll Corporation Drexel Division Div Drexel (USA) |
| 51039 | Landoll Corporation Dba Landoll Corporation Drexel Division Div Drexel (USA) |
| 51039 REV M ITEM 7 | Landoll Corporation Dba Landoll Corporation Drexel Division Div Drexel (USA) |
NSN 4720-01-357-5668 is a Hose Assembly,nonmetallic, manufactured by Landoll Corporation Dba Landoll Corporation Drexel Division Div Drexel, classified under FSC 4720 (No Item Name Available). Status: active.
NSN 4720-01-357-5668 has 3 cross-referenced part numbers: 51039-07 (Landoll Corporation Dba Landoll Corporation Drexel Division Div Drexel), 51039 (Landoll Corporation Dba Landoll Corporation Drexel Division Div Drexel), 51039 REV M ITEM 7 (Landoll Corporation Dba Landoll Corporation Drexel Division Div Drexel).
There are 7 known substitutes for 4720-01-357-5668: 5133-00-266-9465, 5977-00-306-4465, 7510-01-106-0118 and 4 more. Verify interchangeability with system specifications before substitution.
Key specifications for 51039-07: Seat Angle: 37.0 DEGREES FIRST END; Thread Direction: RIGHT-HAND FIRST END; Temp Rating: -40.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF; Inside Diameter: 0.500 INCHES NOMINAL IN. 23 total characteristics are documented in the Federal Logistics Information System.