The Hose Assembly,nonmetallic, cataloged under National Stock Number 4720-01-355-9010, is classified within Federal Supply Class 4720 (Hose and Flexible Tubing) of the Pipe, Tubing, Hose, and Fittings group. The manufacturer of record is Danfoss Power Solutions II, Llc. Government technical data includes 28 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 2 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 4720-01-355-9010 |
| Primary Part Number | 1C01270GGG0250 |
| Item Name | Hose Assembly,nonmetallic |
| FSC / FSG | 4720 / 47 — Hose and Flexible Tubing |
| Manufacturer | Danfoss Power Solutions II, Llc |
| Status | ACTIVE |
| Flow Angle | 45.0 DEGREES SECOND END |
| Measuring Method and Length | 25.000 INCHES NOMINAL OVERALL IN |
| Temp Rating | -50.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| Minimum Inside Bending Radius | 3.500 INCHES IN |
| Connection Style | SWIVEL NUT FLARE SECOND END |
| Connection Style | SWIVEL NUT, GASKET SEAL FIRST END |
| End Connection Design | ELBOW SECOND END |
| End Connection Design | STRAIGHT FIRST END |
| Layer Composition and Location | 1ST LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, ETHYLENE PROPYLENE |
| Connection Type | THREADED INTERNAL TUBE SECOND END |
| Connection Type | THREADED INTERNAL TUBE FIRST END |
| Cross-Sectional Shape Style | ROUND |
| Outside Diameter | 0.690 INCHES NOMINAL IN |
| Operating Pressure | 4000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| Thread Direction | RIGHT-HAND SECOND END |
| Thread Direction | RIGHT-HAND FIRST END |
| Nominal Thread Size | 0.688 INCHES FIRST END IN |
| Nominal Thread Size | 0.562 INCHES SECOND END IN |
| Seat Angle | 37.0 DEGREES SECOND END |
| Inside Diameter | 0.380 INCHES NOMINAL IN |
| Inside Surface Condition | SMOOTH |
| Hydrostatic Test Pressure | 8000.0 POUNDS PER SQUARE INCH LBS |
| Thread Class | 2B FIRST END |
| Thread Class | 2B SECOND END |
| Burst Test Pressure | 16000.0 POUNDS PER SQUARE INCH LBS |
| Thread Quantity Per Inch | 16 FIRST END |
| Thread Series Designator | UN FIRST END |
| Thread Series Designator | UNF SECOND END |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 12553682-1 | Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate (USA) |
| 1C01270GGG0250 PRIMARY | Danfoss Power Solutions II, Llc (USA) |
| Reference | Meaning |
|---|---|
| 242136-6-0250 | 3/2 Design control — primary reference U.S. Government activity |
| 12553682 | D/9 Drawing number reference only Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate |
NSN 4720-01-355-9010 is a Hose Assembly,nonmetallic, manufactured by Danfoss Power Solutions II, Llc, classified under FSC 4720, Hose and Flexible Tubing. Status: active.
NSN 4720-01-355-9010 has 2 manufacturer part numbers on file: 12553682-1 (Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate), 1C01270GGG0250 (Danfoss Power Solutions II, Llc).
2 possible matches (shared part number, not a government interchangeability claim): 4720-01-355-9011, 4720-01-355-9012. Verify interchangeability with system specifications before substitution.
Key specifications for 1C01270GGG0250: Flow Angle: 45.0 DEGREES SECOND END; Measuring Method and Length: 25.000 INCHES NOMINAL OVERALL IN; Temp Rating: -50.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF; Minimum Inside Bending Radius: 3.500 INCHES IN. 28 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.