The Hose Assembly,nonmetallic, cataloged under National Stock Number 4720-01-355-7639, is classified within Federal Supply Class 4720 (Hose and Flexible Tubing) of the Pipe, Tubing, Hose, and Fittings group. The manufacturer of record is Danfoss Power Solutions II, Llc. Government technical data includes 24 specifications, cited from the U.S. Government catalog. The record lists 4 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 4720-01-355-7639 |
| Primary Part Number | 1C754GGG0151180 |
| Item Name | Hose Assembly,nonmetallic |
| FSC / FSG | 4720 / 47 — Hose and Flexible Tubing |
| Manufacturer | Danfoss Power Solutions II, Llc |
| Status | ACTIVE |
| Flow Angle | 45.0 DEGREES SECOND END |
| Flow Angle | 90.0 DEGREES FIRST END |
| Measuring Method and Length | 15.120 INCHES NOMINAL WORKING IN |
| Temp Rating | -40.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| Minimum Inside Bending Radius | 3.500 INCHES IN |
| Connection Style | SWIVEL NUT, GASKET SEAL FIRST END |
| End Connection Design | ELBOW SECOND END |
| End Connection Design | ELBOW FIRST END |
| Layer Composition and Location | 1ST LAYER BRAIDED STEEL WIRE AND OUTER LAYER RUBBER COMPOSITION |
| Angle Between Rigid Elbow Fittings in Deg | 180.0 |
| Connection Type | THREADED INTERNAL TUBE FIRST END |
| Cross-Sectional Shape Style | ROUND |
| Outside Diameter | 0.690 INCHES NOMINAL IN |
| Operating Pressure | 4000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| Thread Direction | RIGHT-HAND FIRST END |
| Nominal Thread Size | 0.688 INCHES FIRST END IN |
| Exterior Color | BLUE |
| Inside Diameter | 0.380 INCHES NOMINAL IN |
| Inside Surface Condition | SMOOTH |
| Thread Class | 2B FIRST END |
| Burst Test Pressure | 16.000 POUNDS PER SQUARE INCH LBS |
| Thread Quantity Per Inch | 16 FIRST END |
| Outer Covering Environmental Protection | ABRASION RESISTANT |
| Thread Series Designator | UN FIRST END |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 1C754GGG0151180 PRIMARY | Danfoss Power Solutions II, Llc (USA) |
| 12563112-2 | Amz Alabama Inc. (USA) |
| 12563112-2 | Bae Systems Land & Armaments L.p. (USA) |
| 12563112-2 PRIMARY | Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate (USA) |
| Reference | Meaning |
|---|---|
| FN272GGG0151180 | 5/9 Secondary reference Eaton Aeroquip Llc Dba Jackson North 1 Div Fluid and Electrical Distribution |
| 1C754GGG0151180 | 5/9 Secondary reference Eaton Aeroquip Llc Dba Jackson North 1 Div Fluid and Electrical Distribution |
NSN 4720-01-355-7639 is a Hose Assembly,nonmetallic, manufactured by Danfoss Power Solutions II, Llc, classified under FSC 4720, Hose and Flexible Tubing. Status: active.
NSN 4720-01-355-7639 has 4 manufacturer part numbers on file: 1C754GGG0151180 (Danfoss Power Solutions II, Llc), 12563112-2 (Amz Alabama Inc.), 12563112-2 (Bae Systems Land & Armaments L.p.), 12563112-2 (Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate).
Key specifications for 1C754GGG0151180: Flow Angle: 45.0 DEGREES SECOND END; Flow Angle: 90.0 DEGREES FIRST END; Measuring Method and Length: 15.120 INCHES NOMINAL WORKING IN; Temp Rating: -40.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF. 24 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.